Alabama landscape architect stamp with the State of Alabama registered landscape architect seal on a floral background, meeting all Alabama landscape architect seal requirements.

Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Alabama State Board of Examiners of Landscape Architects and Ala. Admin. Code r. 500-X-2-.07(3), (3)(a) on 21 September 2026 · Updated 21 September 2026

Alabama gives landscape architects line weights, not just a diameter. Rule 500-X-2-.07(3)(a) fixes a two inch outside diameter, a solid 1/16″ border on the outside edge, a second 1/16″ solid inner border, and a 1/4″ outer ring between them carrying STATE OF ALABAMA at the top and REGISTERED LANDSCAPE ARCHITECT at the bottom. Very few boards specify border weights at all, and a die that gets the words right and the rings wrong does not match the rule.

The middle is prescribed too. The center circle is “divided at the center with a horizontal line with name above and number below the line.” That closes the face: no firm name, no discipline line, no expiration date, no state emblem. Rule 500-X-2-.07(3) also puts your registration number on the seal and on all works you sign, so the number is doing double duty.

What the rule never settles is the device. The words embosser, impression seal, rubber stamp and computer generated appear nowhere in chapter 500-X-2. Because the design is described as ink-drawn borders and rings rather than a raised impression, an inked stamp built to the stated geometry is the safe buy.

Alabama landscape architect seal requirements at a glance

Requirement Alabama rule Source
Seal required Yes Ala. Admin. Code r. 500-X-2-.07(3), (3)(a)
Required elements Your name, above a horizontal center line; Your registration number, below the center line; REGISTERED LANDSCAPE ARCHITECT at the bottom of the outer ring; STATE OF ALABAMA at the top of the outer ring Ala. Admin. Code r. 500-X-2-.07(3)(a)
Size and shape Two inch outside diameter, with a quarter inch outer ring. Ala. Admin. Code r. 500-X-2-.07(3)(a)
Device allowed Not addressed. Rule 500-X-2-.07(3)(a) prescribes the design and the dimensions but names no device: the words embosser, impression seal, rubber stamp and computer generated do not appear. The sources here are rule. Ala. Admin. Code r. 500-X-2-.07(3)(a) (design stated, device not named)
Signature and date The registration number must appear “on all works signed by the landscape architect,” which presumes a signature. Ala. Admin. Code r. 500-X-2-.07(3), (3)(b)
What must be sealed Not addressed as a list. Ala. Admin. Code r. 500-X-2-.07(3), 500-X-2-.01(3), 500-X-2-.09
Electronic seal Alabama addresses the electronic signature, not the electronic seal. Ala. Admin. Code r. 500-X-2-.07(3)(b)
Renewal and lapse Rule 500-X-2-.15, as amended effective 13 April 2026, puts the license period from February 1 to January 31 and provides that “The right to renew expires March 15, of each calendar year,” after which the license is deemed expired and re-registration requires meeting the statutory requirements in existence at the time. Ala. Admin. Code r. 500-X-2-.15 (amended effective April 13, 2026)
Firm requirements Not applicable. Ala. Admin. Code ch. 500 (no certificate of authorization chapter)
Regulator The Alabama State Board of Examiners of Landscape Architects Ala. Admin. Code ch. 500-X-2 (Examinations, License, Fees, and Services), rules 500-X-2-.01, 500-X-2-.07 (Granting of License to Practice Landscape Architecture, including the seal design at subsection (3)(a)), 500-X-2-.12, 500-X-2-.13 and 500-X-2-.15, read in full from the Alabama Legislative Services Agency administrative code site, together with the agency 500 chapter list

Is a seal required in Alabama?

The duty and the design sit in the licensing rule rather than in a seal chapter. Rule 500-X-2-.07(3) provides that the license certificate will indicate the registration number and that “This registration number must appear on the landscape architect’s seal and on all works signed by the landscape architect.” Subparagraph (a) then prescribes the seal in dimensioned detail. The Board’s authority is Code of Ala. 1975, §§ 34-17-1 et seq.

What must appear on the seal

  • Your name, above a horizontal center line
  • Your registration number, below the center line
  • REGISTERED LANDSCAPE ARCHITECT at the bottom of the outer ring
  • STATE OF ALABAMA at the top of the outer ring

This is the most tightly drawn artwork of any Alabama design board, and there is no room for additions. The rule specifies a solid border one sixteenth of an inch wide on the outside edge, a second solid inner border one sixteenth of an inch wide defining a quarter inch outer ring, the two legends in that ring, and a center circle “divided at the center with a horizontal line with name above and number below the line.” Nothing else is authorized: no firm name, no discipline, no expiration date, no state emblem.

Size and shape

Two inch outside diameter, with a quarter inch outer ring. Rule 500-X-2-.07(3)(a): “The seal shall have an outside diameter of 2″ with a solid border 1/16″ wide on the outside edge. There shall be another 1/16″ solid inner border defining a ¼″ outer ring wherein ‘STATE OF ALABAMA’ is at the top and ‘REGISTERED LANDSCAPE ARCHITECT’ is at the bottom.” Alabama gives this board line weights as well as a diameter, which very few states do.

Embosser, rubber stamp or digital

Not addressed. Rule 500-X-2-.07(3)(a) prescribes the design and the dimensions but names no device: the words embosser, impression seal, rubber stamp and computer generated do not appear. The sources here are rule 500-X-2-.07 in full, rules 500-X-2-.01 and 500-X-2-.15, and the chapter list for agency 500, which contains only chapter 500-X-1 (Organization of Board), chapter 500-X-2 (Examinations, License, Fees, and Services) and Appendix A. Because the rule describes ink-drawn borders and rings rather than an embossed impression, an inked stamp built to the stated geometry is the safe buy.

Signing and dating

The registration number must appear “on all works signed by the landscape architect,” which presumes a signature. Rule 500-X-2-.07(3)(b) then authorizes an electronic alternative: “The registrant may affix an electronically generated signature and date of signature to documents; provided, however, that the registrant utilizes a secure method of affixation and provided that the registrant does not authorize any other person to so affix his signature and date. The registrant is responsible for verifying the integrity of the documents and for providing a verification mechanism to the user.” The rule does not require the signature to cross the seal and states no separate date rule for paper documents.

Alabama gives landscape architects line weights, not just a diameter

Most boards state a diameter and leave the rest to a specimen drawing. Rule 500-X-2-.07(3)(a) instead specifies a two inch outside diameter, a solid one sixteenth inch border on the outside edge, a second one sixteenth inch solid inner border, and a quarter inch outer ring between them carrying STATE OF ALABAMA at the top and REGISTERED LANDSCAPE ARCHITECT at the bottom. The center circle is split by a horizontal line with the name above and the number below. A stamp that gets the words right and the rings wrong does not comply.

Which documents must be sealed

Not addressed as a list. Chapter 500-X-2 does not enumerate the documents that must carry the seal; it requires the registration number on the seal and on all works signed by the landscape architect, and it regulates conduct through rules 500-X-2-.12 and 500-X-2-.13. The sources here are rule 500-X-2-.07 in full, rules 500-X-2-.01,.12,.13 and.15, and the agency 500 chapter list. Rule 500-X-2-.09 identifies persons exempt from the licensing requirement, and rule 500-X-2-.01(3) excludes from the practice of landscape architecture the design of structures with separate self-contained purposes and “the making of land surveys of final plats for official approval or recordation.”

Electronic and digital seals

Alabama addresses the electronic signature, not the electronic seal. Rule 500-X-2-.07(3)(b) requires a secure method of affixation, forbids delegating the act to anyone else, and puts two duties on the registrant: verifying the integrity of the documents and “providing a verification mechanism to the user.” No cryptographic standard, certificate authority or approved technology is named. The sources here are chapter 500-X-2 in full for any further electronic provision and found none.

Renewal, lapse and retirement

Rule 500-X-2-.15, as amended effective 13 April 2026, puts the license period from February 1 to January 31 and provides that “The right to renew expires March 15, of each calendar year,” after which the license is deemed expired and re-registration requires meeting the statutory requirements in existence at the time. Renewal applications are mailed each November, must be signed and returned with the fee, and carry the Code of Conduct at rule 500-X-2-.12, which the registrant must read and reaffirm by signature. Not addressed: whether the registration number changes on re-registration, and whether the seal must be destroyed or surrendered. Checked chapter 500-X-2 in full.

Firm requirements

Not applicable. Agency 500 has no certificate of authorization chapter and prescribes no firm seal or firm number. The agency’s entire rule set is chapter 500-X-1, chapter 500-X-2 and Appendix A, and none of it registers business entities. That is unlike Alabama architects, who face a Certificate of Authorization under chapter 100-X-8, and Alabama engineers and land surveyors, who face one under Code of Ala. 1975, § 34-11-9.

What to check before you order

Order a two inch outside diameter device built to the rule’s geometry: a solid one sixteenth inch border at the outside edge, a second solid one sixteenth inch inner border defining a quarter inch ring, STATE OF ALABAMA at the top of that ring and REGISTERED LANDSCAPE ARCHITECT at the bottom, and a center circle divided by a horizontal line with your name above it and your registration number below it. The rule names no device, so buy an inked stamp that will reproduce the borders cleanly. Your registration number has to appear on the seal and on all works you sign. If you sign electronically, you must use a secure method of affixation, you may not let anyone else apply your signature and date, and you are responsible for giving the user a way to verify the document.

Browse landscape architect stamps and seals.

More on this topic

Frequently asked questions

Is a seal required for landscape architects in Alabama?

Yes. The duty sits in the licensing rule rather than a separate seal chapter. Rule 500-X-2-.07(3) provides that your license certificate will show your registration number and that “This registration number must appear on the landscape architect’s seal and on all works signed by the landscape architect.” Subparagraph (a) then prescribes the seal in dimensioned detail. The Board’s authority is Code of Ala. 1975, §§ 34-17-1 et seq.

What has to appear on an Alabama landscape architect seal?

Four items in fixed places under rule 500-X-2-.07(3)(a): STATE OF ALABAMA at the top of the outer ring, REGISTERED LANDSCAPE ARCHITECT at the bottom of it, your name above the horizontal center line, and your registration number below that line. Nothing else is authorized. This is the most tightly drawn artwork of any Alabama design board, and there is no space left over for a firm name, a specialty, a renewal date or an emblem.

What size is an Alabama landscape architect seal?

Two inches outside diameter. Rule 500-X-2-.07(3)(a) reads: “The seal shall have an outside diameter of 2″ with a solid border 1/16″ wide on the outside edge. There shall be another 1/16″ solid inner border defining a ¼″ outer ring wherein ‘STATE OF ALABAMA’ is at the top and ‘REGISTERED LANDSCAPE ARCHITECT’ is at the bottom.” So you are buying three numbers, not one: the outside diameter, the border weight and the ring width.

Rubber stamp or embosser for an Alabama landscape architect?

The rule does not say. Rule 500-X-2-.07(3)(a) prescribes the design and the dimensions but names no device, and the rest of chapter 500-X-2 adds nothing: agency 500 contains only chapter 500-X-1, chapter 500-X-2 and Appendix A. Since the rule describes ink-drawn borders and rings rather than a raised impression, an inked stamp built to the stated geometry is the practical choice, and it also reproduces on a copier, which a blind emboss does not.

Can I sign and date an Alabama landscape architect document electronically?

Yes, with conditions on you rather than on a named technology. Rule 500-X-2-.07(3)(b) provides that “The registrant may affix an electronically generated signature and date of signature to documents; provided, however, that the registrant utilizes a secure method of affixation and provided that the registrant does not authorize any other person to so affix his signature and date. The registrant is responsible for verifying the integrity of the documents and for providing a verification mechanism to the user.” No cryptographic standard, certificate authority or approved product is named anywhere in chapter 500-X-2.

Does my signature have to cross the Alabama seal?

The rule does not require it. Rule 500-X-2-.07(3) puts your registration number “on all works signed by the landscape architect,” which presumes a signature, but chapter 500-X-2 states no placement rule directing the signature across the impression and states no separate date rule for paper documents. Leaving the center of the die readable is still sensible, because the name and the number live there.

Which documents does an Alabama landscape architect have to seal?

Chapter 500-X-2 does not publish a list of document types. What it does say is that the registration number goes on the seal and on all works you sign, and it then regulates conduct through rules 500-X-2-.12 and 500-X-2-.13. Rule 500-X-2-.09 identifies persons exempt from the licensing requirement, and rule 500-X-2-.01(3) puts outside the practice of landscape architecture the design of structures with separate self-contained purposes and “the making of land surveys of final plats for official approval or recordation.”

What happens to my Alabama seal if the registration lapses?

Rule 500-X-2-.15, as amended effective 13 April 2026, runs the license period from February 1 to January 31 and provides that “The right to renew expires March 15, of each calendar year.” After that the license is deemed expired and re-registration requires meeting the statutory requirements in force at that time. Renewal applications go out each November and must be signed and returned with the fee, and they carry the Code of Conduct at rule 500-X-2-.12, which you read and reaffirm by signature. Whether the registration number changes on re-registration, and whether the device must be destroyed or surrendered, are not covered by the chapter.

Does an Alabama landscape architecture firm need its own seal?

No. Agency 500 has no certificate of authorization chapter and prescribes no firm seal and no firm number, and none of its rules register business entities. That is different from Alabama architects, who face a Certificate of Authorization under chapter 100-X-8, and from Alabama engineers and land surveyors, who face one under Code of Ala. 1975, § 34-11-9. Firm identity belongs in the title block, not on the seal.

Acorn Sales Advantages

Made in USAMade in USA
6 Month Stamp Warranty6 Month Stamp Warranty
Free Electronic SealsFree Electronic Seals
FAST 1 Day TurnaroundFAST 1 Day Turnaround
State Board GuaranteeState Board Guarantee
Safe and Secure ShoppingSafe and Secure Shopping