Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the State Board of Licensure for Professional Engineers and Professional Surveyors and 17 Code Ark. R. §§ 285-602, 285-901(d) on 21 September 2026 · Updated 21 September 2026
An Arkansas engineering firm placing its first order is usually buying two kinds of device. 17 CAR § 285-602(c) requires every holder of a certificate of authorization to obtain a seal of the design authorized by the board bearing the name of the firm and the COA number, in addition to the individual seal each licensee carries. Most states, if they ask for the firm number at all, want it as a line of text in the title block.
The individual seal is 1-1/4 to 2 inches in diameter with a milled edge, or, on a rubber stamp, two concentric circles matching the edges of that milling. It carries your name and number exactly as they appear on the certificate of licensure, plus the legend licensed professional engineer.
Count the impressions before choosing a device. The individual seal goes on each page of each final engineering document, including every drawing sheet, while the firm seal has to reach only the cover sheet of the plans, the cover or seals page of specifications, and reports.
Arkansas PE seal requirements at a glance
| Requirement | Arkansas rule | Source |
|---|---|---|
| Seal required | Yes | 17 Code Ark. R. §§ 285-602, 285-901(d) |
| Required elements | Your name as licensed, Your license number, The legend “licensed professional engineer” and A milled edge, or two concentric circles on a rubber stamp | 17 Code Ark. R. § 285-602(a)(1), (d)(2) |
| Size and shape | One and one-quarter inches to two inches in diameter. | 17 Code Ark. R. § 285-602(d)(2)(A), (B), (C) |
| Device allowed | Embosser, inked rubber stamp and electronic application are all legal. | 17 Code Ark. R. § 285-602(d)(2), (d)(3)(B), (d)(5) |
| Signature and date | Every sealed page must be dated and signed as well as stamped. | 17 Code Ark. R. § 285-602(a)(2), (d)(5) |
| What must be sealed | Each page of each final engineering document including drawings, plus the cover sheet of specifications and the signature page of written reports. | 17 Code Ark. R. § 285-602(a)(2), (a)(4), (b)(2), (d)(3)(A) |
| Electronic seal | The digital signature criteria are the three functional tests in § 285-602(d)(5)(A): unique to and under the sole control of the person who applied it, capable of verification, and able to be linked to the document so the signature is invalidated if any data is altered. | 17 Code Ark. R. § 285-602(d)(5) |
| Renewal and lapse | License certificates for professional engineers, for professional surveyors, for dual registrants and for certificates of authority all expire biennially, with the board mailing a renewal notice at least one month before expiration. 17 CAR § 285-602(d)(3)(A) permits the seal to be affixed “only when the license certificate is current and in good standing”, and § 285-602(a)(3) makes it unlawful for an engineer to affix the seal after the expiration of the license or to aid another in evading the statutes and rules. | 17 Code Ark. R. §§ 285-602(a)(3), (d)(3)(A), 285-701 |
| Firm number on documents | The firm needs its own seal, which is unusual. 17 CAR § 285-602(c) requires that “Each firm that is issued a certificate of authorization (COA) shall obtain a seal of the design authorized by the board bearing the name of the firm and the COA number” and attach it, at a minimum, to the cover sheet of the plans, the cover page or the seals page of specifications, and reports, for documents where the professional seal is required. | 17 Code Ark. R. §§ 285-602(c), 285-307(h) |
| Licensing board | The State Board of Licensure for Professional Engineers and Professional Surveyors | 17 Code Ark. R. Title 17, ch. XLIX, subch. A, Part 285 (Rules of the Board), read section by section in the Code of Arkansas Rules, the official version of Arkansas agency rules under Ark. Code § 25-15-218; cross-checked against the board’s own 2026 Laws |
Rules for other states are on PE stamp requirements by state.
Is a seal required in Arkansas?
Arkansas requires a seal Arkansas requires the seal page by page, and the duty sits in board rule rather than in a seal section of the statute. 17 CAR § 285-602(a)(2) provides that “Each page of each final engineering document, to include drawings, and the cover sheet of specifications and the signature page of written reports prepared by a licensee shall, when issued, be dated, signed, and stamped with the said seal or facsimile thereof by the responsible licensee or licensees.” The surveyor parallel in § 285-602(b)(2) covers each page of final drawings and plats and the signature page of reports. 17 CAR § 285-901(d) adds the filing trigger: final drawings, specifications, plans, reports, plats or other documents “when issued or filed for public records, shall be dated and bear the signature and seal” of the licensee who prepared or supervised and approved them. The rule is adopted under Ark. Code §§ 17-30-203 and 17-48-104.
What must appear on the seal
- Your name as licensed
- Your license number
- The legend “licensed professional engineer”
- A milled edge, or two concentric circles on a rubber stamp
The name and number are not free text: § 285-602(d)(2)(D) requires that “The licensee’s name and number inscribed in the seal shall correspond to the name and certificate number shown on the certificate of licensure.” A nickname or a dropped middle initial is a defect. Surveyors take the legend “licensed professional surveyor”. Engineering branch or discipline is not part of the Arkansas design and should not be added. Legacy devices are protected: § 285-602(d)(1)(B) provides that seals previously acquired in compliance with then current rules “need not be changed nor modified as a result of subsequent rule changes unless specifically required”, so a long-held stamp does not have to be recut at every rule revision.
Size and shape
One and one-quarter inches to two inches in diameter. The rule fixes a range, not a single figure: “The seal shall be from one and one-quarter inch (1 ¼ in.) to two inches (2 in.) in diameter and have a milled edge in conformance with the above designs.” A facsimile rubber stamp is authorized in lieu of a seal, and “The stamp may have either a milled edge or two (2) concentric circles with the outer and inner circles corresponding with the respective edges of the milling on the seal.” A 1-5/8 inch stamp sits comfortably inside the range and reduces well.
Embosser, rubber stamp or digital
Embosser, inked rubber stamp and electronic application are all legal. The rule treats the embossed seal as the base case and authorizes a facsimile rubber stamp in lieu of it; § 285-602(d)(5) then permits documents to be “sealed electronically” and signed or transmitted electronically by one of three described routes. The safe buy is a rubber stamp in the 1-1/4 to 2 inch range with either a milled edge or two concentric circles. The licensee remains responsible under § 285-602(d)(3)(B) for assuring the seal, however affixed, is legible on the document.
Signing and dating
Every sealed page must be dated and signed as well as stamped. There is no requirement to sign across the seal on paper. Electronically, § 285-602(d)(5) sets out three routes: a digital signature that is unique to and under the sole control of the person who applied it, capable of verification, and linked so that the signature is invalidated if any data on the document is altered; or a document manually or digitally sealed but not signed, transmitted electronically only if “an original signature and date shall be affixed over the seal and maintained on a paper or electronic copy of the document in the office of record” and the transmitted file carries the sentence “This document was originally issued and sealed by (name of licensee), (license number) on (date). This copy is not a signed and sealed document.”; or a manually or digitally signed and sealed document copied and transmitted digitally. Note the second route does require an original signature over the seal on the retained copy.
Two orders, not one: the individual seal and the firm’s own COA seal
Most states put the firm’s certificate number, if they require it at all, into a line of text on the title block. Arkansas requires the firm to buy a seal. 17 CAR § 285-602(c) tells every certificate of authorization holder to obtain a seal of the design authorized by the board bearing the name of the firm and the COA number, and to attach it, at a minimum, to the cover sheet of the plans, the cover page or the seals page of specifications, and to reports, on every document where the professional seal is required.
Which documents must be sealed
Each page of each final engineering document including drawings, plus the cover sheet of specifications and the signature page of written reports. For surveyors, each page of final drawings and plats plus the signature page of reports and the cover sheet of specifications. The sharpest carve-out runs the other way, as a prohibition: § 285-602(a)(4) provides that “Record or as-built drawings representing what is believed to be constructed shall not be sealed unless specifically required by contract”, and where a contract does require it the drawing must carry a caveat identifying it as a compiled representation, identifying the source and basis of information used, and stating that it is believed correct to the best of the professional’s knowledge but cannot be guaranteed accurate. Sealing is limited to documents prepared by or under the supervision of the licensee and only while the certificate is current and in good standing.
Electronic and digital seals
The digital signature criteria are the three functional tests in § 285-602(d)(5)(A): unique to and under the sole control of the person who applied it, capable of verification, and able to be linked to the document so the signature is invalidated if any data is altered. No certificate authority, no named cryptographic standard, no approved vendor list.
Renewal, lapse and retirement
License certificates for professional engineers, for professional surveyors, for dual registrants and for certificates of authority all expire biennially, with the board mailing a renewal notice at least one month before expiration. 17 CAR § 285-602(d)(3)(A) permits the seal to be affixed “only when the license certificate is current and in good standing”, and § 285-602(a)(3) makes it unlawful for an engineer to affix the seal after the expiration of the license or to aid another in evading the statutes and rules. Whether a license number changes on reinstatement is not addressed in 17 CAR § 285-701 or § 285-601. No surrender or destruction of the device is required.
Firm registration
The firm needs its own seal, which is unusual. 17 CAR § 285-602(c) requires that “Each firm that is issued a certificate of authorization (COA) shall obtain a seal of the design authorized by the board bearing the name of the firm and the COA number” and attach it, at a minimum, to the cover sheet of the plans, the cover page or the seals page of specifications, and reports, for documents where the professional seal is required. The rules elsewhere repeat that each firm issued a certificate of authorization shall obtain a seal and refer the reader back to § 285-602 for design and placement.
What to check before you order
Order between 1-1/4 and 2 inches outside diameter with a milled edge, or, for a rubber stamp, two concentric circles matching the milling edges. Inscribe your name and number exactly as they appear on your certificate of licensure, plus the legend “licensed professional engineer” or “licensed professional surveyor”, and do not add an engineering discipline. If you practice through a firm, the COA seal bearing the firm name and COA number is a separate device under a separate board-authorized design. No rule requires you to show proof of licensure. A seal bought in compliance with earlier rules does not have to be recut when the rules change.
Browse professional engineer stamps and seals.
Frequently asked questions
Is a PE seal required in Arkansas?
Yes, page by page, and the duty sits in board rule. 17 CAR § 285-602(a)(2) requires each page of each final engineering document, including drawings, plus the cover sheet of specifications and the signature page of written reports, to be dated, signed and stamped with the seal or a facsimile of it. 17 CAR § 285-901(d) adds that final documents, when issued or filed for public records, are dated and bear the signature and seal of the licensee who prepared or supervised and approved them.
What size is an Arkansas PE seal?
From 1-1/4 inches to 2 inches in diameter, with a milled edge conforming to the board designs. A facsimile rubber stamp is authorized in lieu of the seal, and it may have either a milled edge or two concentric circles with the outer and inner circles corresponding to the respective edges of the milling. A 1-5/8 inch stamp sits inside the range and reduces well.
Does my Arkansas firm need its own seal?
Yes, if it holds a certificate of authorization. 17 CAR § 285-602(c) requires the firm to obtain a seal of the design authorized by the board bearing the firm name and the COA number. It is a separate board-authorized design, not a copy of the individual seal with the company name swapped in.
Where does the Arkansas firm seal go?
At a minimum on the cover sheet of the plans, the cover page or seals page of specifications, and reports, on documents where the professional seal is required. That is a far shorter list than the individual seal, which goes on every page.
Does every drawing sheet need the individual seal in Arkansas?
Yes. 17 CAR § 285-602(a)(2) says each page of each final engineering document, including drawings. A set of forty sheets takes forty individual impressions and one firm impression, which is why buyers working on large sets tend to move from a hand stamp to a self-inking device.
Embosser, rubber stamp or electronic in Arkansas?
All three are legal. The rule treats the embossed seal as the base case and authorizes a facsimile rubber stamp in lieu of it, and § 285-602(d)(5) permits documents to be sealed electronically and signed or transmitted electronically by one of three described routes. Whichever device is used, § 285-602(d)(3)(B) leaves the licensee responsible for the seal being legible on the document.
Should I seal as-built drawings in Arkansas?
No, unless a contract specifically requires it. 17 CAR § 285-602(a)(4) says record or as-built drawings representing what is believed to be constructed shall not be sealed unless specifically required by contract, and where a contract does require it the drawing must carry a caveat identifying it as a compiled representation, identifying the source and basis of the information used, and stating that it is believed correct to the best of the professional’s knowledge but cannot be guaranteed accurate. An engineer who reflexively stamps the as-builts has broken the rule by sealing.
Does the name on my Arkansas seal have to match my certificate?
Yes. § 285-602(d)(2)(D) requires the licensee’s name and number inscribed in the seal to correspond to the name and certificate number shown on the certificate of licensure. A nickname or a dropped middle initial is a defect. Engineering branch or discipline is not part of the Arkansas design and should not be added.
How do I sign and date an Arkansas document electronically?
By one of the three routes in § 285-602(d)(5): a digital signature that is unique to and under the sole control of the person who applied it, capable of verification, and linked so that it is invalidated if any data on the document is altered; or a document sealed but not signed, transmitted only if an original signature and date are affixed over the seal on a paper or electronic copy kept in the office of record and the transmitted file carries the sentence beginning This document was originally issued and sealed by; or a signed and sealed document copied and transmitted digitally. Note that the second route does require the signature over the seal on the retained copy. No certificate authority or named cryptographic standard is specified.
Do I need a new Arkansas seal at renewal?
Nothing in the rules requires one. Certificates for engineers, surveyors, dual registrants and certificates of authority all expire biennially, and § 285-602(d)(3)(A) permits the seal to be affixed only while the license certificate is current and in good standing. § 285-602(a)(3) makes it unlawful to affix the seal after expiration. Whether a license number changes on reinstatement is not addressed in § 285-701 or § 285-601, and no surrender or destruction of the device is required.
Do I have to recut an older Arkansas seal after a rule change?
No. § 285-602(d)(1)(B) provides that seals previously acquired in compliance with the rules then current need not be changed or modified as a result of subsequent rule changes unless specifically required. Note that the board’s rules were codified into the Code of Arkansas Rules effective January 1, 2025 and now cite as 17 CAR § 285-xxx, so guidance using the old standalone numbering is pointing at pre-codification text.































