Kentucky Registered Professional Geologist stamp on white paper with green leaves and pink background, meeting Geologist Stamp Regulations.

Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Kentucky Board of Registration for Professional Geologists and Ky. Rev. Stat. § 322A.070(2), (4) on 21 September 2026 · Updated 21 September 2026

Kentucky does not make you buy a geologist seal, and it publishes no regulation describing one. KRS 322A.070(2) provides that “Each registrant may, upon registration, obtain and use a seal or stamp of registration of the design authorized by the board, containing the registrant’s name and number and the legend ‘Registered Professional Geologist.’” May, not shall. Those three items are the whole statutory list, and 201 KAR chapter 031 contains no seal regulation at all: its regulations cover fees, board member compensation, applications and examinations, renewals, the code of professional conduct, geologist-in-training, complaint management and administrative subpoenas.

So almost everything about the object is open. No diameter, no shape, no proportion, no device type: the words embossed, computer generated, electronic and digital do not appear in KRS 322A.070. The design is one the board has authorized, so ask the Kentucky Board of Registration for Professional Geologists for its artwork, and then make the rest of it what you want. Acorn will cut it to whatever you specify around those three elements.

You hold a real Kentucky credential, so use it accurately. The legend is Registered Professional Geologist, which is the state-issued title here, and the state name is not a statutory element. Delaware and New Hampshire say Licensed Professional Geologist and Louisiana says Professional Geoscientist, and those are their titles rather than yours. Put your own name, your firm name, and the credential Kentucky actually issued you, and leave off any title another state issues.

Kentucky geologist seal requirements at a glance

Requirement Kentucky rule Source
Seal required No, but an optional seal is specified Ky. Rev. Stat. § 322A.070(2), (4)
Required elements Your name, Your registration number and The legend Registered Professional Geologist Ky. Rev. Stat. § 322A.070(2)
Size and shape Not addressed. KRS 322A.070 states no diameter, shape or proportion, and 201 KAR chapter 031, the Board of Registration for Professional Geologists regulations, contains no seal regulation: the current chapter is fees. Ky. Rev. Stat. § 322A.070 (silent)
Device allowed Not addressed. The statute speaks of a “seal or stamp of registration,” which covers both an impression and an inked device, and names nothing else: the words embossed, computer generated, electronic and. Ky. Rev. Stat. § 322A.070(2)
Signature and date The statute treats the signature and the seal as alternatives for the act it prohibits after suspension or revocation, but it does not require them to be used together, and it states no date requirement. Ky. Rev. Stat. § 322A.070(4) (silent as to date and placement)
What must be sealed Not addressed as a list. Ky. Rev. Stat. §§ 322A.070(4), 322A.080, 322A.090
Electronic seal Not addressed. KRS chapter 322A contains no electronic or digital seal provision, names no technology, certificate authority or verification standard, and 201 KAR chapter 031 contains no seal regulation in which one. Ky. Rev. Stat. ch. 322A (no electronic seal provision)
Renewal and lapse KRS 322A.070(4) is the operative sentence for the device: no person shall affix a signature or stamp, seal or certify any reports or other documents after the registrant’s certificate has been suspended or revoked, unless the certificate has been renewed or reissued. Ky. Rev. Stat. §§ 322A.060, 322A.070(3), (4)
Firm requirements Not applicable. Ky. Rev. Stat. ch. 322A (no business entity provision)
Regulator The Kentucky Board of Registration for Professional Geologists Ky. Rev. Stat. ch. 322A, §§ 322A.010 through 322A.990, principally § 322A.070 (Certificates of registration

Is a seal required in Kentucky?

Kentucky makes the geologist seal permissive on its face. KRS 322A.070(2) provides that “Each registrant may, upon registration, obtain and use a seal or stamp of registration of the design authorized by the board, containing the registrant’s name and number and the legend ‘Registered Professional Geologist.’” May, not shall. What is mandatory is the prohibition on the other side: KRS 322A.070(4) provides that “No person shall affix his signature or stamp, seal, or certify any reports or other documents after the certificate of registration of the registrant named thereon has been suspended or revoked, unless the certificate of registration has been renewed or reissued.”

What must appear on the seal

  • Your name
  • Your registration number
  • The legend Registered Professional Geologist

Three statutory elements and a board-authorized design. The statute does not put the state name on the face, which is unusual, and it does not authorize a specialty designation. Note the legend: Kentucky says Registered Professional Geologist, where Delaware and New Hampshire say Licensed Professional Geologist and Louisiana says Professional Geoscientist. Take the artwork from the board, because § 322A.070(2) makes the design one authorized by the board.

Size and shape

Not addressed. KRS 322A.070 states no diameter, shape or proportion, and 201 KAR chapter 031, the Board of Registration for Professional Geologists regulations, contains no seal regulation: the current chapter is fees at 31:010, compensation of board members at 31:020, applications and examinations at 31:040, renewals at 31:050, the code of professional conduct at 31:060, geologist-in-training at 31:080, complaint management at 31:090 and administrative subpoena at 31:100. The sources here are the chapter 031 regulation list and KRS ch. 322A section headings. Ask the board for its authorized design.

Embosser, rubber stamp or digital

Not addressed. The statute speaks of a “seal or stamp of registration,” which covers both an impression and an inked device, and names nothing else: the words embossed, computer generated, electronic and digital do not appear in KRS 322A.070. Chapter 031 of 201 KAR adds nothing. Because a seal has to read on the reports a client or an agency receives, an inked stamp built to the board’s authorized design is the safe buy.

Signing and dating

The statute treats the signature and the seal as alternatives for the act it prohibits after suspension or revocation, but it does not require them to be used together, and it states no date requirement. Not addressed: whether a signature must accompany the seal, whether a date is required and whether the signature must cross the impression. The sources here are KRS 322A.070 in full and the 201 KAR chapter 031 regulation list, including the code of professional conduct at 201 KAR 31:060. Contrast Kentucky engineers and land surveyors, for whom KRS 322.340(3) requires the seal or stamp, the signature and the date together.

The seal is optional, the design is the board’s, and there is no regulation about it

KRS 322A.070(2) says a registrant may obtain and use a seal. Kentucky does not compel the purchase, and it does not publish a regulation describing the device: 201 KAR chapter 031 covers fees, board compensation, applications and examinations, renewals, the code of professional conduct, geologist-in-training, complaint management and administrative subpoenas, and contains no seal regulation at all. The design is whatever the board has authorized, and it has to be asked for.

Which documents must be sealed

Not addressed as a list. KRS 322A.070 creates the seal and the prohibition without enumerating documents; what the statute reaches is “any reports or other documents” that might be signed, stamped, sealed or certified. Section 322A.090 carries the prohibitions on practice by an unregistered person and § 322A.080 the exemptions from registration. The sources here are the KRS chapter 322A section list, §§ 322A.010 through 322A.990, and the 201 KAR chapter 031 regulation list. Seal the geological reports and documents you issue, and take any document-specific requirement from the board.

Electronic and digital seals

Not addressed. KRS chapter 322A contains no electronic or digital seal provision, names no technology, certificate authority or verification standard, and 201 KAR chapter 031 contains no seal regulation in which one could sit. The sources here are the chapter 322A section list and the chapter 031 regulation list. Kentucky does give its landscape architects a six-part electronic seal standard at 201 KAR 10:070 Section 2 and its engineers and land surveyors a digital signature standard at 201 KAR 18:104 Section 3; neither reaches a geologist. Treat a claimed Kentucky electronic geologist sealing standard as unverified.

Renewal, lapse and retirement

KRS 322A.070(4) is the operative sentence for the device: no person shall affix a signature or stamp, seal or certify any reports or other documents after the registrant’s certificate has been suspended or revoked, unless the certificate has been renewed or reissued. Note the wording: suspended or revoked. KRS 322A.060 covers renewal of certificates and suspension and revocation for nonpayment of renewal fees, and 201 KAR 31:050 governs renewals. KRS 322A.070(3) provides for a replacement certificate where one is lost, destroyed or mutilated, subject to board regulation. Not addressed: whether the registration number changes on reinstatement and whether the device must be surrendered or destroyed.

Firm requirements

Not applicable. Kentucky registers individuals under KRS chapter 322A and issues no geology firm registration, certificate of authorization or firm seal; the chapter’s section list runs from definitions through the board, requirements for registration, geologist-in-training qualifications, fees, renewal, certificates and seals, exemptions, prohibitions, grounds for board action and penalties, with no business entity provision. That is unlike Kentucky engineering and land surveying, where KRS 322.060 and 201 KAR 18:180 require a business entity permit.

What to check before you order

Ask the board for its authorized seal design before ordering, because KRS 322A.070(2) makes the design one authorized by the board and neither the statute nor 201 KAR chapter 031 prescribes a size or a layout. The statute puts three things on the face: your name, your registration number and the legend Registered Professional Geologist. Kentucky does not require the state name on this device, and it does not authorize a specialty designation. An inked stamp is the practical choice, because the impression has to read on the reports you issue. Kentucky does not force you to buy a seal at all, but it does forbid signing, stamping, sealing or certifying reports or other documents once your certificate has been suspended or revoked.

Browse geologist stamps and seals.

More on this topic

Frequently asked questions

Is a geologist seal required in Kentucky?

Not on the face of the statute. KRS 322A.070(2) says a registrant may obtain and use a seal or stamp of registration, which does not compel the purchase. What is mandatory is the prohibition on the other side, at KRS 322A.070(4): “No person shall affix his signature or stamp, seal, or certify any reports or other documents after the certificate of registration of the registrant named thereon has been suspended or revoked, unless the certificate of registration has been renewed or reissued.”

What has to appear on a Kentucky geologist seal?

Your name, your registration number and the legend Registered Professional Geologist, in a design the board has authorized. That is the complete list in KRS 322A.070(2). Kentucky does not put the state name on the face, which is unusual, and it does not authorize a specialty designation.

What size is a Kentucky geologist seal?

No size is prescribed. KRS 322A.070 states no diameter, shape or proportion, and 201 KAR chapter 031 has no seal regulation in which one could sit. Ask the board for its authorized design and size for legibility on the reports you issue, which for a round die usually means somewhere between 1-1/2 and 2 inches.

Rubber stamp or embosser in Kentucky?

Your call. The statute speaks of a “seal or stamp of registration,” which covers both an impression and an inked device, and names nothing else. An inked stamp built to the board’s authorized design is the practical choice, because the impression has to read on the reports a client or an agency receives and a dry emboss does not survive a copier.

Can I seal a Kentucky geologic report electronically?

Chapter 322A contains no electronic or digital seal provision, names no technology, certificate authority or verification standard, and 201 KAR chapter 031 has no seal regulation. Kentucky does give its landscape architects a six-part electronic seal standard at 201 KAR 10:070 Section 2 and its engineers and land surveyors a digital signature standard at 201 KAR 18:104 Section 3, and neither reaches a geologist. Treat a claimed Kentucky electronic geologist sealing standard as unverified and ask the board.

Do I have to sign and date beside the seal?

The statute does not say. It treats the signature and the seal as alternatives for the act it prohibits after suspension or revocation, and states no date requirement, no placement rule and nothing about the signature crossing the impression. Contrast Kentucky engineers and land surveyors, for whom KRS 322.340(3) requires the seal or stamp, the signature and the date together.

Which documents should I seal?

KRS 322A.070 creates the seal and the prohibition without enumerating documents, and what the statute reaches is “any reports or other documents” that might be signed, stamped, sealed or certified. Section 322A.090 carries the prohibitions on practice by an unregistered person and section 322A.080 the exemptions from registration. Seal the geological reports and documents you issue, and take any document-specific requirement from the board.

What happens to the seal if my registration lapses?

KRS 322A.070(4) forbids affixing a signature or stamp, sealing or certifying any reports or other documents after the certificate has been suspended or revoked, unless it has been renewed or reissued. Note the wording is suspended or revoked, and that KRS 322A.060 provides for suspension and revocation for nonpayment of renewal fees. Treat a lapsed certificate as a stop on the device and confirm your status with the board before sealing.

Does the registration number change on reinstatement?

The statute does not say, and neither does 201 KAR chapter 031. There is also no stated duty to surrender or destroy the device. KRS 322A.070(3) does provide for a replacement certificate where one is lost, destroyed or mutilated, subject to board regulation, which is a different thing from the seal itself.

Does a Kentucky geology firm need a permit?

No. Kentucky registers individuals under chapter 322A and issues no geology firm registration, certificate of authorization or firm seal. The chapter runs from definitions through the board, requirements for registration, geologist-in-training qualifications, fees, renewal, certificates and seals, exemptions, prohibitions, grounds for board action and penalties, with no business entity provision. Kentucky engineering and land surveying works differently, requiring a business entity permit under KRS 322.060 and 201 KAR 18:180.

Acorn Sales Advantages

Made in USAMade in USA
6 Month Stamp Warranty6 Month Stamp Warranty
Free Electronic SealsFree Electronic Seals
FAST 1 Day TurnaroundFAST 1 Day Turnaround
State Board GuaranteeState Board Guarantee
Safe and Secure ShoppingSafe and Secure Shopping