Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Louisiana Horticulture Commission, within the Louisiana Department of Agriculture and Forestry and La. R.S. 3:3808(E)(7), (8) on 21 September 2026 · Updated 21 September 2026
You sign first, then place the seal over the signature. LAC 7:XXIX § 117.B.3.c is unambiguous: “The licensee shall sign his or her legal name on each document and shall then affix his or her seal over that signature. The presence of one’s seal over the signature on any document constitutes proof that he or she accepts all legal and professional responsibility for the work accomplished.” Beside the signature is not what the rule says. Most states permit adjacent placement; Louisiana requires overlay for this profession, and the signature has to be your legal name.
The other surprise is the agency. This is not a design board credential. Louisiana landscape architects are licensed by the Louisiana Horticulture Commission within the Department of Agriculture and Forestry, under the Horticulture Commission Law in Title 3 of the Revised Statutes and LAC Title 7, alongside arborists, landscape horticulturists and landscape irrigation contractors. Renewal dates and reinstatement mechanics come from the Commission, not from LAPELS or the architects’ board.
The device itself is circular and 1 5/8 inches in diameter, a single figure rather than a range, carrying State of Louisiana along the top circumference, Licensed Landscape Architect along the bottom, your name horizontally in the center of the field and your registration number below the name. There is no state emblem on it, unlike the Louisiana architect seal, which must carry the pelican under LAC 46:I § 1303.B.
Louisiana landscape architect seal requirements at a glance
| Requirement | Louisiana rule | Source |
|---|---|---|
| Seal required | Yes | La. R.S. 3:3808(E)(7), (8) |
| Required elements | State of Louisiana along the top circumference; Licensed Landscape Architect along the bottom circumference; Your name horizontally in the center of the field; Your registration number below the name | LAC 7:XXIX § 117.B.3.a |
| Size and shape | Circular and one and five-eighths inches in diameter. | LAC 7:XXIX § 117.B.3.a |
| Device allowed | Two devices. Section 117.B.3.b provides that “A rubber stamp facsimile, which conforms to the official design of the seal described in §117.B.3.a of this Part, may be obtained and used in place of the seal by. | LAC 7:XXIX § 117.B.3.b |
| Signature and date | Sign first, then stamp over the signature. | LAC 7:XXIX § 117.B.3.c (silent as to date) |
| What must be sealed | All professional documents issued by the licensed landscape architect for use in Louisiana, which the rule lists as “contracts, maps, plans, designs, drawings, specifications, estimates and reports.” Contracts and estimates are named, which is broader than most states reach. | LAC 7:XXIX § 117.B.3 |
| Electronic seal | Not addressed. LAC 7:XXIX § 117.B.3 names a seal and a rubber stamp facsimile and nothing else; the words computer generated, electronic and digital do not appear in it, and the signature rule requires the licensee. | LAC 7:XXIX § 117.B.3 (no electronic sealac provision) |
| Renewal and lapse | Not addressed in the seal rule. | La. R.S. 3:3804, 3:3808 (Horticulture Commission Law) |
| Firm requirements | Not addressed. Section 117.B.3 puts nothing about a firm on the device and prescribes no firm seal or firm number, and the seal is described throughout as the individual licensee’s. The sources here are §. | LAC 7:XXIX § 117.B.3 (no firm provision) |
| Regulator | The Louisiana Horticulture Commission, within the Louisiana Department of Agriculture and Forestry | LAC Title 7 (Agriculture and Animals), § 117.B.3 (landscape architect seal), read from the Horticulture Commission Rules and Regulations Title 7 document published by the Louisiana Department of Agriculture and Forestry |
Is a seal required in Louisiana?
Louisiana licenses landscape architects through its Horticulture Commission rather than through a design board, and both the statute and the rule are express. La. R.S. 3:3808(E)(7) provides that “Each landscape architect shall affix his seal to all drawings or specifications prepared by or under the direct supervision of the landscape architect,” and R.S. 3:3808(E)(8) that “The seals used by landscape architects shall meet the specifications determined by rule by the commission.” LAC 7:XXIX § 117.B.3 supplies those specifications and widens the document list: “Each landscape architect shall obtain a seal of the design authorized by the commission. The seal shall be placed on all professional documents, including contracts, maps, plans, designs, drawings, specifications, estimates and reports, issued by a licensed landscape architect for use in this state.”
What must appear on the seal
- State of Louisiana along the top circumference
- Licensed Landscape Architect along the bottom circumference
- Your name horizontally in the center of the field
- Your registration number below the name
Four elements with their positions fixed by rule, and nothing else authorized. Note the legend: Licensed Landscape Architect, where the Louisiana architect rule says Registered Architect and the Louisiana interior design board uses Registered Interior Designer. Note also that this device carries no state emblem, unlike the Louisiana architect seal, which must carry the pelican under LAC 46:I § 1303.B. Take the artwork from the Commission, because § 117.B.3 makes the design one authorized by the commission.
Size and shape
Circular and one and five-eighths inches in diameter. Section 117.B.3.a: “The seal required shall be circular and 1 5/8 inches in diameter.” A single figure, not a range. That happens to coincide with the smaller of the two Louisiana engineer and land surveyor diameters under LAC 46:LXI § 2701.A.2, but the design inside it is entirely different, and it is not the Louisiana architect figure of approximately 1 3/4 inches.
Embosser, rubber stamp or digital
Two devices. Section 117.B.3.b provides that “A rubber stamp facsimile, which conforms to the official design of the seal described in §117.B.3.a of this Part, may be obtained and used in place of the seal by a licensed landscape architect.” The rule names no computer generated or electronic seal. The safe buy is the rubber stamp facsimile, because the rule requires the seal to go over a handwritten signature and both have to read on the documents that leave the office.
Signing and dating
Sign first, then stamp over the signature. Section 117.B.3.c is unambiguous: “The licensee shall sign his or her legal name on each document and shall then affix his or her seal over that signature. The presence of one’s seal over the signature on any document constitutes proof that he or she accepts all legal and professional responsibility for the work accomplished.” Two things follow. The signature must be the licensee’s legal name, and the seal must physically overlay it rather than sit beside it. The rule states no date requirement.
The seal goes over the signature, and the licensing body is the Horticulture Commission
Two things about Louisiana landscape architecture surprise people from other states. The first is the agency: this is not a design board credential. Landscape architects are licensed by the Louisiana Horticulture Commission within the Department of Agriculture and Forestry, under the Horticulture Commission Law in Title 3 of the Revised Statutes and LAC Title 7, alongside arborists, landscape horticulturists and landscape irrigation contractors.
Which documents must be sealed
All professional documents issued by the licensed landscape architect for use in Louisiana, which the rule lists as “contracts, maps, plans, designs, drawings, specifications, estimates and reports.” Contracts and estimates are named, which is broader than most states reach. The statute at R.S. 3:3808(E)(7) states the narrower version, drawings or specifications prepared by or under the direct supervision of the landscape architect, so the rule is the operative list. There is no preliminary or draft carve-out in § 117.B.3. The scope of practice is at R.S. 3:3808(E)(1), which covers consultation, investigation, research, preparation of general development and detailed landscape design plans, studies, specifications and responsible supervision where the principal purpose is to arrange and modify the effects of natural scenery for aesthetic effect.
Electronic and digital seals
Not addressed. LAC 7:XXIX § 117.B.3 names a seal and a rubber stamp facsimile and nothing else; the words computer generated, electronic and digital do not appear in it, and the signature rule requires the licensee to sign his or her legal name and then affix the seal over that signature, which points at a physical process. The sources here are § 117.B.3 in full from the Commission’s published Title 7 rules and checked La. R.S. 3:3808(E). Treat an electronic Louisiana landscape architect seal as unverified rather than authorized, and confirm with the Commission before relying on one.
Renewal, lapse and retirement
Not addressed in the seal rule. Section 117.B.3 does not say what happens to the device on expiration, suspension or revocation, whether the license number changes on reinstatement, or whether the seal must be surrendered. The sources here are § 117.B.3 in full and checked La. R.S. 3:3804(A)(5) and 3:3808(E). Licensing, renewal and discipline for this profession run through the Horticulture Commission under the Horticulture Commission Law in Title 3, not through the Louisiana design boards, so take renewal dates and reinstatement mechanics from the Commission rather than from LAPELS or the architects’ board.
Firm requirements
Not addressed. Section 117.B.3 puts nothing about a firm on the device and prescribes no firm seal or firm number, and the seal is described throughout as the individual licensee’s. The sources here are § 117.B.3 in full. Note the regulatory neighborhood: the Commission also licenses landscape horticulturists, and the Department’s published guidance requires a landscape horticulturist who draws designs to include the individual’s name, the words Landscape Horticulturist and the license number on all drawings, which is a marking rule rather than a seal.
What to check before you order
Order a circular device exactly one and five-eighths inches in diameter with the words State of Louisiana along the top circumference and Licensed Landscape Architect along the bottom, your name set horizontally in the center of the field and your registration number below it. Build to the design the Commission authorizes. A rubber stamp facsimile conforming to that official design may be used in place of the seal, and it is the practical choice. Sign your legal name on each document first, then place the seal over the signature; the rule treats the seal over the signature as proof that you accept all legal and professional responsibility for the work. Seal the whole list the rule gives: contracts, maps, plans, designs, drawings, specifications, estimates and reports issued for use in Louisiana.
Browse landscape architect stamps and seals.
Frequently asked questions
Is a seal required for landscape architects in Louisiana?
Yes, in both the statute and the rule. La. R.S. 3:3808(E)(7) provides that “Each landscape architect shall affix his seal to all drawings or specifications prepared by or under the direct supervision of the landscape architect,” and R.S. 3:3808(E)(8) that “The seals used by landscape architects shall meet the specifications determined by rule by the commission.” LAC 7:XXIX § 117.B.3 supplies the specifications and widens the document list.
What has to appear on a Louisiana landscape architect seal?
Four elements with their positions fixed by § 117.B.3.a: State of Louisiana along the top circumference, Licensed Landscape Architect along the bottom circumference, your name horizontally in the center of the field, and your registration number below the name. Nothing else is authorized. Note the legend is Licensed Landscape Architect, where the Louisiana architect rule says Registered Architect and the interior design board uses Registered Interior Designer.
What size is a Louisiana landscape architect seal?
Circular and one and five-eighths inches in diameter. Section 117.B.3.a: “The seal required shall be circular and 1 5/8 inches in diameter.” A single figure, not a range. It happens to coincide with the smaller of the two Louisiana engineer and land surveyor diameters under LAC 46:LXI § 2701.A.2, but the design inside it is entirely different, and it is not the Louisiana architect figure of approximately 1 3/4 inches.
Can I use a rubber stamp in Louisiana?
Yes. Section 117.B.3.b provides that “A rubber stamp facsimile, which conforms to the official design of the seal described in §117.B.3.a of this Part, may be obtained and used in place of the seal by a licensed landscape architect.” The stamp is the practical choice, because the rule requires the seal to go over a handwritten signature and both have to read on the documents that leave the office.
Why does the Horticulture Commission license Louisiana landscape architects?
Because that is where the statute puts the profession. Licensing, renewal and discipline run through the Louisiana Horticulture Commission under the Horticulture Commission Law in Title 3, not through the Louisiana design boards. The Commission also licenses arborists, landscape horticulturists and landscape irrigation contractors, and the authorized seal design comes from it.
Which Louisiana documents have to be sealed?
All professional documents issued for use in Louisiana, which § 117.B.3 lists as “contracts, maps, plans, designs, drawings, specifications, estimates and reports.” Contracts and estimates are named, which is broader than most states reach, and sealing a fee estimate is not something a landscape architect from a neighboring state would expect to do. The statute at R.S. 3:3808(E)(7) states the narrower version, so the rule is the operative list. There is no preliminary or draft carve-out.
Does Louisiana require a date with the seal?
Section 117.B.3.c states no date requirement. What it does require is the legal name signature and the seal placed over it. The scope of practice that triggers all of this is at R.S. 3:3808(E)(1), covering consultation, investigation, research, preparation of general development and detailed landscape design plans, studies, specifications and responsible supervision where the principal purpose is to arrange and modify the effects of natural scenery for aesthetic effect.
Is an electronic Louisiana landscape architect seal allowed?
Section 117.B.3 names a seal and a rubber stamp facsimile and nothing else. The words computer generated, electronic and digital do not appear in it, and the signature rule, which requires you to sign your legal name and then affix the seal over that signature, points at a physical process. Treat an electronic Louisiana landscape architect seal as unverified rather than authorized, and confirm with the Commission before relying on one.
What happens to a Louisiana seal if the license lapses?
The seal rule does not say. Section 117.B.3 is silent on expiration, suspension and revocation, on whether the registration number changes on reinstatement, and on whether the device must be surrendered. Because licensing and discipline run through the Horticulture Commission under Title 3, take those questions there.
Does a Louisiana landscape architecture firm get a seal?
No. Section 117.B.3 puts nothing about a firm on the device and prescribes no firm seal or firm number, and the seal is described throughout as the individual licensee’s. Worth knowing about the regulatory neighborhood: the Commission also licenses landscape horticulturists, and the Department’s published guidance requires a landscape horticulturist who draws designs to include the individual’s name, the words Landscape Horticulturist and the license number on all drawings, which is a marking rule rather than a seal.































