Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Nebraska Board of Geologists and Neb. Rev. Stat. § 81-3529(3)(a), (3)(c) on 21 September 2026 · Updated 21 September 2026
Nebraska gives geologists a placement rule with no discretion in it: whenever the seal is applied, your signature goes across it. Neb. Rev. Stat. § 81-3529(3)(b) says exactly that, and it is stricter than the guidance the Nebraska Board of Engineers and Architects gives its own licensees, who may sign across or adjacent to the face of the stamp. Two Nebraska credentials, two different answers.
The face carries four items under § 81-3529(3)(a): the State of Nebraska, your name, your license number and the words Licensed Professional Geologist. The design itself is determined by the Nebraska Board of Geologists and no diameter, shape or proportion appears in the statute, so ask the Board for the determined design before ordering. Note the legend: Nebraska says Licensed, matching Delaware and New Hampshire, rather than the Registered Professional Geologist wording used in Alabama, Arkansas, Kentucky and Mississippi.
The statute asks for the date of placement, not simply a date. Subsection (3)(c) requires the seal and the date of its placement on all technical submissions and calculations whenever presented to a client or any public or governmental agency, and subsection (3)(d) requires the seal, signature and date to reproduce clearly on originals and reproducible copies. That reproduction test is why an inked stamp is the safe buy.
Nebraska geologist seal requirements at a glance
| Requirement | Nebraska rule | Source |
|---|---|---|
| Seal required | Yes | Neb. Rev. Stat. § 81-3529(3)(a), (3)(c) |
| Required elements | State of Nebraska, Your name, Your license number and The words Licensed Professional Geologist | Neb. Rev. Stat. § 81-3529(3)(a) |
| Size and shape | Not addressed in the statute. | Neb. Rev. Stat. § 81-3529(3)(a) (design determined by the board |
| Device allowed | Not addressed as a list of devices. | Neb. Rev. Stat. § 81-3529(3)(d) |
| Signature and date | The signature goes across the seal. | Neb. Rev. Stat. § 81-3529(3)(b), (3)(c), (3)(d) |
| What must be sealed | All technical submissions and calculations presented to a client or any public or governmental agency. | Neb. Rev. Stat. §§ 81-3529(3)(c), (3)(d), (3)(e), 81-3530 |
| Electronic seal | Not addressed. The Geologists Regulation Act contains no electronic or digital seal provision for geologists and names no technology, certificate authority or verification standard. The sources here are § 81-3529. | Neb. Rev. Stat. § 81-3529(3)(b) (board may prescribe seal application regulations) |
| Renewal and lapse | Section 81-3529(3)(c) makes it unlawful to apply the seal, or permit it to be affixed, after the certificate has expired, or to aid or abet another person in evading the Geologists Regulation Act. | Neb. Rev. Stat. §§ 81-3529(3)(c), 81-3535, 81-3537 |
| Firm requirements | Not addressed in the seal section. | Neb. Rev. Stat. § 81-3529(3)(d) |
| Regulator | The Nebraska Board of Geologists | Neb. Rev. Stat. §§ 81-3501 to 81-3550, the Geologists Regulation Act, principally § 81-3529 (Professional geologist |
Is a seal required in Nebraska?
Neb. Rev. Stat. § 81-3529(3)(a) requires each professional geologist authorized to practice geology to obtain a seal whose design is determined by the board, containing the State of Nebraska, the geologist’s name, the license number and the words Licensed Professional Geologist. Subsection (3)(c) supplies the trigger: “The seal and the date of its placement shall be on all technical submissions and calculations whenever presented to a client or any public or governmental agency,” and makes it unlawful to apply or permit the affixing of the seal after the certificate has expired or to aid another in evading the act.
What must appear on the seal
- State of Nebraska
- Your name
- Your license number
- The words Licensed Professional Geologist
Four statutory elements and a board-determined design. Nebraska says Licensed Professional Geologist, which matches Delaware and New Hampshire and differs from the Registered Professional Geologist wording used in Alabama, Arkansas, Kentucky and Mississippi. The element list is deliberately parallel to the Nebraska architect and engineer seal at § 81-3437.01, which also carries State of Nebraska, the name, the license number and the profession, so the three Nebraska devices are distinguished only by the profession line. The board may adopt further seal application regulations under subsection (3)(b).
Size and shape
Not addressed in the statute. Section 81-3529(3)(a) requires a seal “the design of the seal shall be determined by the board” and prescribes no diameter, shape or proportion. The sources here are § 81-3529 in full and checked §§ 81-3530, 81-3533, 81-3534, 81-3535 and 81-3537. Note for comparison that the Nebraska Board of Engineers and Architects states in its own published guidance that it stipulates no size for architects and professional engineers and makes legibility the test; that is a different board, but it is the closest published Nebraska analogue. Ask the Board of Geologists for the determined design.
Embosser, rubber stamp or digital
Not addressed as a list of devices. Section 81-3529 names no device: the words embossed, rubber stamp, facsimile, computer generated and electronic do not appear in it. What subsection (3)(d) does require is reproduction: seals must appear on originals and reproducible copies so that the seal, signature and date reproduce clearly. An inked stamp built to the board-determined design is therefore the safe buy, because an embossed impression alone will not satisfy that test.
Signing and dating
The signature goes across the seal. Section 81-3529(3)(b) states it without qualification: “Whenever the seal is applied, the professional geologist’s signature shall be across the seal.” Not adjacent, not nearby. Subsection (3)(c) adds that the seal and the date of its placement go on all technical submissions and calculations presented to a client or any public or governmental agency, and subsection (3)(d) requires the seal, signature and date to reproduce clearly on originals and reproducible copies. Multiple sheets are sealed and dated page by page by the responsible geologist, and title pages need the signatures of all involved.
Across the seal, not beside it, and the date of placement travels with it
Neb. Rev. Stat. § 81-3529(3)(b) gives Nebraska geologists a placement rule that leaves no discretion: whenever the seal is applied, the signature shall be across the seal. Compare the Nebraska Board of Engineers and Architects guidance, which allows architects and professional engineers to sign across or adjacent to the face of the stamp. Two Nebraska credentials, two different answers, and the geologist rule is the stricter one.
Which documents must be sealed
All technical submissions and calculations presented to a client or any public or governmental agency. Sheet by sheet: subsection (3)(d) requires multiple sheets to be sealed and dated by the responsible geologist page by page, with title pages carrying the signatures of all involved parties. Subsection (3)(e) covers the visiting professional: a temporary permit holder from another state “shall use his or her state of licensure seal and shall affix his or her signature and temporary permit to all of his or her work.” Section 81-3530 adds the responsibility limit: “A professional geologist shall only affix his or her seal and signature when he or she was in responsible charge of the work.”
Electronic and digital seals
Not addressed. The Geologists Regulation Act contains no electronic or digital seal provision for geologists and names no technology, certificate authority or verification standard. The sources here are § 81-3529 in full. Note that the board may prescribe seal application regulations under subsection (3)(b), so an electronic provision may sit in the board’s rules; take it from the board. For comparison, the Nebraska Board of Engineers and Architects handles the electronic case through a security duty at 110 Neb. Admin. Code ch. 6, rule 6.1.8, and the Board of Examiners for Land Surveyors by issuing registrants a digital seal.
Renewal, lapse and retirement
Section 81-3529(3)(c) makes it unlawful to apply the seal, or permit it to be affixed, after the certificate has expired, or to aid or abet another person in evading the Geologists Regulation Act. Section 81-3535 separately makes it a prohibited act to present or attempt to use the certificate of licensure or the seal of another person, and § 81-3537 sets out the disciplinary actions and penalties the board may impose. Not addressed: whether the license number changes on reinstatement, and whether the device must be surrendered or destroyed. The sources here are §§ 81-3529, 81-3530, 81-3534, 81-3535 and 81-3537.
Firm requirements
Not addressed in the seal section. Section 81-3529 puts nothing about a firm on the device and prescribes no firm seal; subsection (3)(d) instead handles the multi-author case by requiring the responsible geologist to seal and date each page and the title page to carry the signatures of all involved. Do not carry across the Nebraska Board of Engineers and Architects requirement that an organization’s certificate of authorization number appear on each drawing and on the cover or first page of specifications, reports and studies; that sits in 110 Neb. Admin. Code ch. 7 and governs architecture and engineering organizations.
What to check before you order
Ask the Nebraska Board of Geologists for the seal design it has determined, because § 81-3529(3)(a) delegates the design and the statute states no diameter. The face carries four things: the State of Nebraska, your name, your license number and the words Licensed Professional Geologist. No device is named in the statute, so buy an inked stamp, because the seal, signature and date must reproduce clearly on originals and reproducible copies. Sign across the seal, not beside it. Put the seal and the date of its placement on all technical submissions and calculations you present to a client or to any public or governmental agency, sealing and dating each page of a multi-sheet submission. If you are working on a temporary permit, use your home state seal with your signature and your temporary permit.
Browse geologist stamps and seals.
Frequently asked questions
Is a geologist seal required in Nebraska?
Yes. Neb. Rev. Stat. § 81-3529(3)(a) requires each professional geologist authorized to practice to obtain a seal, and subsection (3)(c) requires the seal and the date of its placement on all technical submissions and calculations whenever presented to a client or any public or governmental agency. The same subsection makes it unlawful to apply or permit the affixing of the seal after the certificate has expired, or to aid another in evading the act.
What size is a Nebraska geologist seal?
The statute states none. Section 81-3529(3)(a) delegates the design to the board and prescribes no diameter, shape or proportion, so ask the Board of Geologists for the determined design. For comparison, the Nebraska Board of Engineers and Architects states in its own published guidance that it stipulates no size for architects and professional engineers and makes legibility the test, which is the closest published Nebraska analogue rather than a rule that binds you.
What goes on the face?
Four items: the State of Nebraska, your name, your license number and the words Licensed Professional Geologist. That list is deliberately parallel to the Nebraska architect and engineer seal at § 81-3437.01, which also carries the state, the name, the license number and the profession, so the three Nebraska devices differ only in the profession line.
Does the signature really have to cross the seal?
Yes. Section 81-3529(3)(b) states it without qualification: “Whenever the seal is applied, the professional geologist’s signature shall be across the seal.” Not adjacent, not nearby. Order a die with an open enough center that a signature across it still leaves the name and number readable.
Rubber stamp or embosser in Nebraska?
The statute names no device: the words embossed, rubber stamp, facsimile, computer generated and electronic do not appear in § 81-3529. What subsection (3)(d) does require is that the seal, signature and date reproduce clearly on originals and reproducible copies, and an embossed impression alone will not meet that test. An inked stamp built to the board-determined design is the safe buy.
Which documents have to be sealed?
All technical submissions and calculations presented to a client or any public or governmental agency. Multiple sheets are sealed and dated page by page by the responsible geologist under subsection (3)(d), and title pages carry the signatures of all involved parties.
Can I seal work I was not in responsible charge of?
No. Section 81-3530 is explicit: “A professional geologist shall only affix his or her seal and signature when he or she was in responsible charge of the work.” That is a separate section from the seal provision and it applies to every application of the device.
I am working in Nebraska on a temporary permit. Do I need a Nebraska seal?
No. Subsection (3)(e) covers the visiting professional: a temporary permit holder from another state “shall use his or her state of licensure seal and shall affix his or her signature and temporary permit to all of his or her work.” The Engineers and Architects Regulation Act takes the same approach at § 81-3437.01(5).
Does Nebraska set an electronic sealing standard for geologists?
The Geologists Regulation Act contains no electronic or digital seal provision and names no technology, certificate authority or verification standard. The board may prescribe seal application regulations under subsection (3)(b), so an electronic provision may sit in the board’s rules; take it from the board. For comparison, the Board of Engineers and Architects handles the electronic case through a security duty at 110 Neb. Admin. Code ch. 6, rule 6.1.8, and the Board of Examiners for Land Surveyors issues registrants a digital seal.
Does a Nebraska geology firm number go on the report?
No. Section 81-3529 puts nothing about a firm on the device and prescribes no firm seal, handling the multi-author case instead by requiring the responsible geologist to seal and date each page with the title page carrying the signatures of all involved. Do not carry across the Board of Engineers and Architects requirement that an organization’s certificate of authorization number appear on each drawing and on the cover or first page of specifications, reports and studies, which sits in 110 Neb. Admin. Code ch. 7 and governs architecture and engineering organizations.































