Professional engineer seal on white paper with brown envelope on turquoise table, meeting Kansas engineering embosser standards and featuring Kansas engineering seal.

Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Kansas State Board of Technical Professions and Kan. Stat. Ann. § 74-7023(d) on 21 September 2026 · Updated 21 September 2026

Kansas regulates architecture, engineering, geology, landscape architecture and surveying through a single Board of Technical Professions, and K.A.R. 66-6-1 gives all five the same seal. Outer circle 1 5/8 inches. Inner circle 1 1/16 inches. LICENSED at the top of the inner circle, KANSAS at the bottom, license certificate number in the center, name at the top of the ring. The only variable is the profession legend in the lower ring.

Get the legend from the board rather than from the customer’s job title. The board’s Seal FAQ fixes the exact words: PROFESSIONAL ENGINEER, ARCHITECT, LANDSCAPE ARCHITECT, PROFESSIONAL SURVEYOR or PROFESSIONAL GEOLOGIST. Kansas says PROFESSIONAL SURVEYOR, not professional land surveyor, and ARCHITECT, not registered architect.

There is also a clock. K.A.R. 66-6-1(a) requires a licensee to obtain the seal within 30 days of a license being issued, which is a deadline rather than a matter of convenience, and K.S.A. 74-7023(d) adds that “No person shall tamper with or revise the seal without express written approval by the board.”

Kansas PE seal requirements at a glance

Requirement Kansas rule Source
Seal required Yes Kan. Stat. Ann. § 74-7023(d)
Required elements Two concentric circles, Your name as it appears on your license, Your profession, The word LICENSED, The word KANSAS and Your license certificate number Kan. Admin. Regs. 66-6-1(a)
Size and shape Outer circle 1 5/8 inches in diameter, inner circle 1 1/16 inches in diameter. Kan. Admin. Regs. 66-6-1(a)
Device allowed K.A.R. 66-6-1(a) states plainly that “The seal may be a rubber stamp, an embossed seal, or a digital seal.” All three are legal. Kan. Admin. Regs. 66-6-1(a)
Signature and date K.A.R. 66-6-1(b)(1) requires that after the seal is applied, the licensee apply “the licensee’s handwritten or authenticated digital signature and the date across the seal.” Across the seal, not beside it. Kan. Admin. Regs. 66-6-1(b)(1)
What must be sealed K.A.R. 66-6-1(c)(1) reaches “each document, including drawings, technical reports, original land descriptions for the purpose of conveying an interest in real property, records, and papers,” subject to the practice exemptions in K.S.A. 74-7031 through 74-7034 and 74-7042a. Kan. Admin. Regs. 66-6-1(c), (d), (e)
Electronic seal K.A.R. 66-6-1(b)(3) sets four tests for a digital signature: unique to the licensee, able to be verified, under the sole control of the licensee, and linked to the document so that the signature is invalidated if any data is altered. Kan. Admin. Regs. 66-6-1(b)(3), (4)
Renewal and lapse K.S.A. 74-7023(d) makes it “unlawful for anyone to stamp any document with the seal after the license has expired or has been revoked, unless the license has been renewed or reissued.” Kansas licenses renew every two years under K.A.R. 66-6-10(a). Kan. Stat. Ann. § 74-7023(d)
Firm number on documents A certificate of authorization is required to do business, but its number does not go on the document. Kan. Stat. Ann. § 74-7036
Licensing board The Kansas State Board of Technical Professions Kan. Admin. Regs. 66-6-1 (Seals

Rules for other states are on PE stamp requirements by state.

Is a seal required in Kansas?

Kansas requires a seal The statute creates the duty and the regulation puts a clock on it. K.S.A. 74-7023(d) provides that each licensee “shall obtain a seal of a distinctive design authorized by the board, bearing the licensee’s name and number and a uniform inscription formulated by the board,” and that “Documents signed by the licensee in the licensee’s professional capacity shall be stamped with the seal during the duration of the license.” K.A.R. 66-6-1(a) adds the deadline: each licensee must obtain the seal “within 30 days of a license being issued.” K.A.R. 66-6-1(c)(1) then requires each document to be sealed, signed, and dated by the licensee who prepared it or who is in responsible charge, subject only to the statutory practice exemptions.

What must appear on the seal

  • Two concentric circles
  • Your name as it appears on your license
  • Your profession
  • The word LICENSED
  • The word KANSAS
  • Your license certificate number

Kansas fixes every position. K.A.R. 66-6-1(a) puts “LICENSED” at the top of the inner circle, “KANSAS” at the bottom of the inner circle, and the license certificate number in the center of the inner circle; the ring between the circles carries the licensee’s name at the top and the profession at the bottom. The only permitted variation is the given name: the seal “may contain, before the licensee’s surname, an abbreviated form of the licensee’s given name or a combination of initials representing the licensee’s given name.” The surname is not abbreviable. K.S.A. 74-7023(d) prohibits tampering: “No person shall tamper with or revise the seal without express written approval by the board.” The board’s published Seal FAQ gives the exact profession legend for each credential: PROFESSIONAL ENGINEER, ARCHITECT, LANDSCAPE ARCHITECT, PROFESSIONAL SURVEYOR, or PROFESSIONAL GEOLOGIST.

Size and shape

Outer circle 1 5/8 inches in diameter, inner circle 1 1/16 inches in diameter. K.A.R. 66-6-1(a) states both figures. The board’s Seal FAQ repeats the same two dimensions, so the numbers cross check against two board sources. There is no tolerance stated and no alternative size.

Embosser, rubber stamp or digital

K.A.R. 66-6-1(a) states plainly that “The seal may be a rubber stamp, an embossed seal, or a digital seal.” All three are legal. A rubber stamp is the safe buy because K.A.R. 66-6-1(b)(2) contemplates the sealed document being reproduced as necessary for the project, and an unpigmented embossed impression does not survive photocopying. The board’s Seal FAQ confirms that computer generated seals were formally accepted after a public hearing in December 1997, with digital seal provisions added in March 2008.

Signing and dating

K.A.R. 66-6-1(b)(1) requires that after the seal is applied, the licensee apply “the licensee’s handwritten or authenticated digital signature and the date across the seal.” Across the seal, not beside it. The same subsection provides that the seal, signature, and date together constitute certification that the document was created by the licensee or under the licensee’s responsible charge. There is no requirement for an original wet signature on a retained copy; the signature may be handwritten or an authenticated digital signature meeting K.A.R. 66-6-1(b)(3).

One seal design covers five professions in Kansas, and only the bottom line changes

Kansas regulates architecture, engineering, geology, landscape architecture, and surveying through a single Board of Technical Professions, and K.A.R. 66-6-1 gives all five the same seal. Outer circle 1 5/8 inches. Inner circle 1 1/16 inches. LICENSED at the top of the inner circle, KANSAS at the bottom, license number in the center. Name at the top of the ring. The only variable is the profession at the bottom of the ring, and the board’s Seal FAQ fixes the exact words: PROFESSIONAL ENGINEER, ARCHITECT, LANDSCAPE ARCHITECT, PROFESSIONAL SURVEYOR, or PROFESSIONAL GEOLOGIST.

That matters commercially because a supplier who gets the Kansas geometry right once can serve all five professions from the same die layout, and a supplier who gets it wrong is wrong five times over. Note that Kansas says PROFESSIONAL SURVEYOR, not PROFESSIONAL LAND SURVEYOR, and ARCHITECT, not REGISTERED ARCHITECT.

The 30 day clock is the second trap. K.A.R. 66-6-1(a) requires the licensee to obtain a seal within 30 days of the license being issued. Kansas is one of the few states that gives a deadline rather than leaving acquisition to the licensee’s convenience, which means a newly licensed Kansas professional is a time sensitive order.

Third, the signature goes across the seal, and K.S.A. 74-7023(d) forbids tampering with or revising the seal without express written approval from the board. A licensee who changes a practice name or wants a variant device cannot simply order a new one to taste.

Which documents must be sealed

K.A.R. 66-6-1(c)(1) reaches “each document, including drawings, technical reports, original land descriptions for the purpose of conveying an interest in real property, records, and papers,” subject to the practice exemptions in K.S.A. 74-7031 through 74-7034 and 74-7042a. K.A.R. 66-6-1(c)(2) specifies documents submitted to any public or governmental agency, a client, or a user for final approval or recording, plus each revision. K.A.R. 66-6-1(d)(1) sets the placement for each document type: every sheet of a drawing set, or only the first sheet where a digital authentication process digitally links all sheets, or a certification block on the cover sheet designating which sheets belong to which licensee; the cover sheet or index page for specifications; the first or last page for a technical report, survey plat, or original land description. Two carve-outs in K.A.R. 66-6-1(e): a working drawing or preliminary document bearing in large bold letters “PRELIMINARY, NOT FOR CONSTRUCTION, RECORDING PURPOSES, OR IMPLEMENTATION” or words of comparable meaning, and published standard details, drawings, or specifications adopted by a municipal, county, or public agency when incorporated in that agency’s own projects.

Electronic and digital seals

K.A.R. 66-6-1(b)(3) sets four tests for a digital signature: unique to the licensee, able to be verified, under the sole control of the licensee, and linked to the document so that the signature is invalidated if any data is altered. No certificate authority is named. K.A.R. 66-6-1(b)(4) adds a consequence the other states leave implicit: every transmitted or stored electronic document containing a digital signature must bear the signature, date of signing, and seal as confirmation that the document was not altered after signing, and “If the electronic document is altered, the signature, date, and seal shall be void.”

Renewal, lapse and retirement

K.S.A. 74-7023(d) makes it “unlawful for anyone to stamp any document with the seal after the license has expired or has been revoked, unless the license has been renewed or reissued.” Kansas licenses renew every two years under K.A.R. 66-6-10(a). The same regulation creates inactive status, which requires renewal and fee but no continuing education, and emeritus status for licensees at least 60 years old, available by one time application with no fee; a licensee on either status “shall not practice a technical profession in Kansas.” The license certificate number does not change on renewal, and the seal carries no date, so a Kansas seal does not expire and never needs reordering for renewal reasons.

Firm registration

A certificate of authorization is required to do business, but its number does not go on the document. K.S.A. 74-7036(a) requires a business entity organized for the practice of one or more of the technical professions to obtain a certificate of authorization before doing business in the state, to designate one or more licensed principals in responsible charge, and to have a licensed professional regularly supervising each separate office. The certificate is renewed biennially. Neither K.A.R. 66-6-1 nor K.A.R. 66-6-4 requires the certificate of authorization number, the firm name, or firm contact information to appear on a sealed document. The firm has no seal of its own.

What to check before you order

Build to K.A.R. 66-6-1(a) exactly: two concentric circles, outer 1 5/8 inches, inner 1 1/16 inches, LICENSED at the top of the inner circle, KANSAS at the bottom of the inner circle, your license certificate number centered in the inner circle, your name in the upper ring, and the profession legend in the lower ring. Take the profession wording from the board's Seal FAQ rather than from how you would describe your own job. Decide whether the name carries your full given name or the initials the rule permits; your surname must be spelled out. Rubber stamps, embossers and digital seals are all authorized, so pick the one you want. The regulation imposes no proof-of-licensure requirement before your seal is made.

Browse professional engineer stamps and seals.

More on this topic

Frequently asked questions

Is a seal required for a Kansas professional engineer?

Yes, and within a deadline. K.S.A. 74-7023(d) requires each licensee to “obtain a seal of a distinctive design authorized by the board, bearing the licensee’s name and number and a uniform inscription formulated by the board,” and provides that “Documents signed by the licensee in the licensee’s professional capacity shall be stamped with the seal during the duration of the license.” K.A.R. 66-6-1(a) requires the seal to be obtained within 30 days of a license being issued, and K.A.R. 66-6-1(c)(1) requires each document to be sealed, signed and dated by the licensee who prepared it or who is in responsible charge, subject only to the statutory practice exemptions.

What goes where on a Kansas seal?

Every position is fixed by K.A.R. 66-6-1(a). Two concentric circles. LICENSED at the top of the inner circle, KANSAS at the bottom of the inner circle, and the license certificate number in the center of the inner circle. The ring between the circles carries the licensee’s name at the top and the profession at the bottom. The only permitted variation is the given name: the seal “may contain, before the licensee’s surname, an abbreviated form of the licensee’s given name or a combination of initials representing the licensee’s given name.” The surname is not abbreviable.

What size is a Kansas seal?

Outer circle 1 5/8 inches in diameter, inner circle 1 1/16 inches. K.A.R. 66-6-1(a) states both figures and the board’s Seal FAQ repeats them, so the numbers cross check against two board sources. There is no tolerance stated and no alternative size.

Rubber stamp, embosser or digital seal in Kansas?

All three. K.A.R. 66-6-1(a) states plainly that “The seal may be a rubber stamp, an embossed seal, or a digital seal.” The rubber stamp is the practical buy because K.A.R. 66-6-1(b)(2) contemplates the sealed document being reproduced as necessary for the project, and an unpigmented embossed impression does not survive photocopying. The board’s Seal FAQ records that computer generated seals were formally accepted after a public hearing in December 1997, with digital seal provisions added in March 2008.

Do I sign across a Kansas seal?

Yes. K.A.R. 66-6-1(b)(1) requires that after the seal is applied the licensee apply “the licensee’s handwritten or authenticated digital signature and the date across the seal.” Across it, not beside it. The seal, signature and date together constitute certification that the document was created by the licensee or under the licensee’s responsible charge. There is no requirement for an original wet signature on a retained copy; the signature may be handwritten or an authenticated digital signature meeting K.A.R. 66-6-1(b)(3).

Which Kansas documents have to be sealed, and where on each?

K.A.R. 66-6-1(c)(1) reaches “each document, including drawings, technical reports, original land descriptions for the purpose of conveying an interest in real property, records, and papers,” subject to the practice exemptions in K.S.A. 74-7031 through 74-7034 and 74-7042a, and (c)(2) specifies documents submitted to any public or governmental agency, a client or a user for final approval or recording, plus each revision. Placement is set by document type in K.A.R. 66-6-1(d)(1): every sheet of a drawing set, or only the first sheet where a digital authentication process digitally links all sheets, or a certification block on the cover sheet designating which sheets belong to which licensee; the cover sheet or index page for specifications; and the first or last page for a technical report, survey plat or original land description.

What is exempt from sealing in Kansas?

Two carve-outs in K.A.R. 66-6-1(e). A working drawing or preliminary document bearing in large bold letters “PRELIMINARY, NOT FOR CONSTRUCTION, RECORDING PURPOSES, OR IMPLEMENTATION” or words of comparable meaning, and published standard details, drawings or specifications adopted by a municipal, county or public agency when incorporated in that agency’s own projects.

What does Kansas require of a digital signature?

Four tests in K.A.R. 66-6-1(b)(3): unique to the licensee, able to be verified, under the sole control of the licensee, and linked to the document so that the signature is invalidated if any data is altered. No certificate authority is named. K.A.R. 66-6-1(b)(4) adds the consequence other states leave implicit: every transmitted or stored electronic document containing a digital signature must bear the signature, date of signing and seal as confirmation that the document was not altered after signing, and “If the electronic document is altered, the signature, date, and seal shall be void.”

Do I need a new Kansas seal when I renew?

No. The license certificate number does not change on renewal and the seal carries no date, so a Kansas seal does not expire and never needs reordering for renewal reasons. Licenses renew every two years under K.A.R. 66-6-10(a). K.S.A. 74-7023(d) makes it “unlawful for anyone to stamp any document with the seal after the license has expired or has been revoked, unless the license has been renewed or reissued.” The same regulation creates inactive status, which requires renewal and fee but no continuing education, and emeritus status for licensees at least 60 years old, available by one time application with no fee; a licensee on either status “shall not practice a technical profession in Kansas.”

Can I have my Kansas seal altered or remade to a different design?

Not without the board. K.S.A. 74-7023(d) provides that “No person shall tamper with or revise the seal without express written approval by the board.” A licensee who changes a practice name or wants a variant device cannot simply order one to taste.

Does a Kansas firm number go on the sealed document?

No. K.S.A. 74-7036(a) requires a business entity organized for the practice of one or more of the technical professions to obtain a certificate of authorization before doing business in the state, to designate one or more licensed principals in responsible charge, and to have a licensed professional regularly supervising each separate office, with the certificate renewed biennially. Neither K.A.R. 66-6-1 nor K.A.R. 66-6-4 requires the certificate of authorization number, the firm name or firm contact information to appear on a sealed document, and the firm has no seal of its own.

Acorn Sales Advantages

Made in USAMade in USA
6 Month Stamp Warranty6 Month Stamp Warranty
Free Electronic SealsFree Electronic Seals
FAST 1 Day TurnaroundFAST 1 Day Turnaround
State Board GuaranteeState Board Guarantee
Safe and Secure ShoppingSafe and Secure Shopping