Becoming a professional land surveyor in Wisconsin may seem easy enough, but there’s actually a good deal of work that goes into it. Amongst other things, you’ll need a sound understanding of the industry and you’ll have to know how to translate this with a bit of business acumen into an actual job.
If you know what you’re doing, then you probably already know you need a Wisconsin land surveyor seal in order to legally operate in this function. Unfortunately, a lot of people in your shoes forget to review theirs before going out and getting started. Should anything be wrong with it, they won’t find out until it’s too late.
The Dimensions of the Wisconsin Land Surveyor Seal
This is why you have to look over your Wisconsin land surveyor seal thoroughly before using it. Fortunately, it’s a pretty simple seal, so this is fairly easy to do. Let’s begin with the dimensions.
The Wisconsin land surveyor seal can actually be anywhere between 1-5/8” and 2" in diameter. Typically, though, these seals tend to be 1-5/8”, but it’s not required.
The Appearance of the Wisconsin Land Surveyor Seal
Then there’s the actual Wisconsin land surveyor seal itself and how it looks. Again, this is a pretty simple seal, so you shouldn’t have much trouble confirming if yours is in compliance or not.
Along the perimeter, there should be a perforated design. Then, inside the seal, you’ll notice there is another circle. This one, though, is outlined in dots.
Going across the top of the seal is the word, “Wisconsin.” The state’s name is bookended by two stars. Going across the bottom, the stamp should read, “Land Surveyor.”
Now, in the middle circle, there are four pieces of information that must be displayed. First, there is your full name, which must be shown as it appeared on your application. Then, you should have your license number listed. After that, the city you’re licensed in and then, “Wisconsin.”
That’s really all there is to the Wisconsin land surveyor seal. Take a minute when you get yours to look it over quickly and you’ll be able to rest assured yours is in compliance before using it. Doing so might end up saving you a lot of money and frustration.
Frequently Asked Questions
What are the Wisconsin land surveyor seal requirements?
A compliant Wisconsin land surveyor seal must be circular, with a diameter between 1-5/8 inches and 2 inches. It must include a perforated outer border, an inner dotted circle, the word “Wisconsin” across the top with two stars, and “Land Surveyor” across the bottom.
What information must appear in the center of a Wisconsin professional surveyor stamp?
The center of the seal must display your full name exactly as it appears on your application, your license number, the city where you are licensed, and the word “Wisconsin.”
How big does a compliant Wisconsin land surveyor seal have to be?
The seal must measure between 1-5/8 inches and 2 inches in diameter. Many seals are 1-5/8 inches, but any size within that range is acceptable under Wisconsin land surveyor seal requirements.
What happens if my Wisconsin surveyor seal is not compliant?
If your seal is not compliant, your plats or survey documents may be rejected, delayed, or questioned for legal validity. Using an incorrect seal can also create compliance issues that may affect your work and licensure.
Do I need to check my Wisconsin professional surveyor stamp before using it?
Yes. Before using your stamp or seal, you should verify that all required elements are present and accurate. A quick check can help prevent costly mistakes, project delays, and approval problems.
Why is Wisconsin land surveyor seal compliance important for plats and legal documents?
Proper seal compliance helps ensure your plats and survey documents are accepted by reviewers and remain legally valid. Following Wisconsin Professional Surveyor Stamp Compliance protects both your work product and your professional standing.
