Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against no Colorado board licenses this profession and Colorado Division of Professions and Occupations, occupational professions list on 21 September 2026 · Updated 21 September 2026
Colorado does not license, register or certify geologists, so there is no Colorado geologist seal to comply with. The Division of Professions and Occupations publishes the full list of occupational professions it regulates, which runs from accountancy and architects through engineers, land surveyors, landscape architects, electrical, plumbing and radon professionals, and geology does not appear on it. Title 12 of the Colorado Revised Statutes has no geology article: Article 120 covers architects, professional engineers and professional land surveyors, and Article 130 covers landscape architects.
That is better news than it first sounds. Because Colorado prescribes nothing, Colorado restricts nothing. There is no required diameter, no required legend, no authorized artwork to match and no board filing step. Your stamp stops being a compliance item and becomes a design decision, which is the one part of this you get to control. Acorn will cut it to whatever you want on it: your own name, your firm name, a monogram, your logo, or a credential you actually hold from a state that does license the profession.
One line to hold to. Put your own name, your firm name, and any credential you actually hold, named with the state or organization that issued it. Leave off “Licensed” and “Registered” and any state-issued title unless the state issued you one, because that is the part some states do restrict.
Colorado geologist seal requirements at a glance
| Requirement | Colorado rule | Source |
|---|---|---|
| Seal required | Not licensed here | Colorado Division of Professions and Occupations, occupational professions list |
| Required elements | Not applicable: Colorado issues no geologist seal | Colorado Division of Professions and Occupations, occupational professions list |
| Size and shape | Not applicable. | C.R.S. Title 12, Articles 120 and 130 (silent as to geology) |
| Device allowed | Not applicable. | C.R.S. §§ 12-120-216 and 12-130-116 |
| Signature and date | Not applicable. | 4 CCR 730-1, Rules 1.5(A)(3), 1.6(A)(3) and 1.7(A)(1) |
| What must be sealed | Not applicable to a geologist directly. | 4 CCR 730-1, Rule 1.5(A)(2) |
| Electronic seal | Not applicable. | 4 CCR 730-1, Rule 1.2(B) |
| Renewal and lapse | Not applicable. | C.R.S. Title 12 (no geology credential to renew) |
| Firm requirements | Not applicable. | C.R.S. Title 12, Articles 120 and 130 (no firm registration provisions) |
| Regulator | No Colorado board licenses this profession | Colorado Division of Professions and Occupations list of regulated occupational professions, with C.R.S. Title 12 Article 120 (architects, professional engineers and professional land surveyors), Article 130 (landscape architects) and 4 CCR 730-1, Rules 1.2(B), 1.5(A) and 1.7(A). Colorado licenses no geologists. |
Is a seal required in Colorado?
Colorado does not license, register or certify geologists, and issues no geologist seal or stamp. The Division of Professions and Occupations publishes the full list of occupational professions it regulates, which includes accountancy, architects, engineers and land surveyors, barbering and cosmetology, combative sports, electrical, landscape architects, nontransplant tissue banks, outfitters, passenger tramway, plumbing and radon professionals. Geology does not appear on it. Title 12 of the Colorado Revised Statutes has no geology article; Article 120 covers architects, professional engineers and professional land surveyors and Article 130 covers landscape architects.
What must appear on the seal
- Not applicable: Colorado issues no geologist seal
There is no Colorado geologist seal to specify, because Colorado issues no geologist credential. Geologists working in Colorado commonly hold a registration from a state that does license the profession, such as Wyoming, or a national credential from a voluntary body; neither authorizes a Colorado seal and neither should be presented on a Colorado document in a form that implies state licensure. Where Colorado law refers to a professional geologist for a particular regulatory program, it does so by defining the term for that program rather than by creating a license, so any such reference is a qualification test and not an authority to seal.
Size and shape
Not applicable. No Colorado statute or rule prescribes a geologist seal, because no Colorado board issues a geology credential. Checked the Division of Professions and Occupations list of regulated occupational professions, C.R.S. Title 12 Article 120 and C.R.S. Title 12 Article 130. None of them creates or mentions a geology license.
Embosser, rubber stamp or digital
Not applicable. Colorado authorizes the crimp type, rubber stamp type and computer generated type seal at C.R.S. § 12-120-216 and 4 CCR 730-1 for architects, professional engineers and professional land surveyors, and a stamp for landscape architects at C.R.S. § 12-130-116. No device is authorized for a geologist, because Colorado issues no geology credential to put on one.
Signing and dating
Not applicable. Colorado’s signature rules attach to the credentials it issues: signature and date through the seal for engineers and land surveyors under 4 CCR 730-1 Rules 1.5(A)(3) and 1.6(A)(3), across the face of each original seal imprint for architects under Rule 1.7(A)(1), and stamp with signature and date on record set reproductions for landscape architects under C.R.S. § 12-130-116(2)(a). A geologist working in Colorado signs as an unlicensed professional and should add no legend or number implying a Colorado credential.
Colorado has no geologist license, which surprises people who work in Wyoming next door
Geology is licensed in roughly thirty states, including Wyoming immediately to the north, and consultants who move between the two assume the Colorado side works the same way. It does not. The Colorado Division of Professions and Occupations list of regulated occupational professions has no geology entry, and Title 12 of the Colorado Revised Statutes has no geology article. There is no board, no registration, no authorized seal design and no legend.
A Wyoming professional geologist seal is a Wyoming device. Applying it to a Colorado deliverable does not make the work sealed in Colorado, and a round die that reads COLORADO with a number in it asserts a credential the state does not issue.
The consequential Colorado rule sits on the engineering side. 4 CCR 730-1 Rule 1.5(A)(2) requires a Colorado licensed professional engineer to seal each sheet of engineering drawings and the title or signature page of engineering reports, with the signature and date appearing through the seal under Rule 1.5(A)(3). When geologic findings are bound into a geotechnical or engineering report, that engineer is responsible for the whole document unless a written note adjacent to the seal limits the scope to named disciplines. That note is how a Colorado engineering report properly attributes the geology, and it is a better tool than any seal a geologist could buy.
Which documents must be sealed
Not applicable to a geologist directly. The Colorado question is when geologic work is swept into a sealed engineering document. Sheets of engineering drawings, the cover, title or contents pages of bound specifications and the title or signature page of engineering reports must be sealed by a Colorado licensed professional engineer under 4 CCR 730-1 Rule 1.5(A)(2). Where geotechnical or geologic findings are issued as part of an engineering report, the engineer sealing that report is responsible for the entire document unless a written note adjacent to the seal limits the scope to named disciplines.
Electronic and digital seals
Not applicable. The electronic signature standard in 4 CCR 730-1 Rule 1.2(B), which names public key infrastructure and signature dynamics technology, applies to the architects, engineers and land surveyors the board licenses. Colorado sets no electronic signing standard for geologists because it sets no signing standard for them at all.
Renewal, lapse and retirement
Not applicable. There is no Colorado geology license to renew, lapse, reinstate or revoke and no Colorado registration number that could change. A registration held in another state renews under that state’s rules and confers no Colorado authority, and a voluntary national credential is governed by the issuing organization.
Firm requirements
Not applicable. Colorado registers no design or geoscience firms at all. There is no certificate of authorization under C.R.S. Title 12 Article 120 for engineering, surveying or architecture firms, none under Article 130 for landscape architecture, and nothing for geology. A Colorado geology consultancy holds no board credential and no seal. Where its work is issued as part of a sealed engineering document, responsibility sits with the individual Colorado licensed professional engineer who sealed it.
What to check before you order
Do not order a Colorado geologist seal. Colorado issues no geology credential, so a device carrying the state name and a number claims an authority that does not exist, and a seal from a state that does license geologists should stay in use only for that state’s work. If you want an identifier for Colorado deliverables, ask for a rectangular text block with your name, your firm and the exact name and issuing state or organization of any credential you hold, with no circle and no Colorado reference. When geologic findings go into a Colorado engineering report, the seal on that report belongs to a Colorado licensed professional engineer, and the right place for your attribution is the written scope note the rules allow adjacent to that seal.
Browse geologist stamps and seals.
Frequently asked questions
Does Colorado require a geologist to have a seal?
No, and it could not, because it issues no credential to put on one. The Division of Professions and Occupations list of regulated occupational professions has no geology entry, and no article of Title 12 creates a geology license. With no license there is no number, no legend and no sealing duty.
Is there a Colorado geologist license at all?
There is not. Geology is licensed in roughly thirty states, including Wyoming immediately to the north, which is why consultants who work both sides of the line often assume Colorado works the same way. It does not. There is no board, no registration, no authorized seal design and no legend anywhere in Colorado law.
Can I use my Wyoming or other state geologist seal on Colorado work?
A seal from a state that licenses geologists is that state’s device and carries that state’s authority. Applying it to a Colorado deliverable does not make the work sealed in Colorado, because Colorado has no scheme for it to fit into. Keep it in use for the work of the state that issued it, and do not build a separate round die reading COLORADO with a number in it, since that asserts a credential the state does not issue.
What can I put on a Colorado geologist stamp?
Whatever is true of you. Your name as you use it professionally, your firm name, contact details, a monogram or logo, and the exact name of any credential you hold together with the state or organization that issued it. A rectangular text block often works better than a circle here, precisely because it does not imitate the look of a licensing seal.
What size and shape should it be?
Any size and any shape. No Colorado statute or rule prescribes a geologist seal, so there is nothing to match. Most people ordering one land between 1-1/2 and 2 inches for a round die, or around 2-1/2 by 1 inch for a rectangular name and firm block, purely because those read well on a report page.
Who seals geologic findings that go into a Colorado submittal?
The Colorado licensed professional engineer. 4 CCR 730-1 Rule 1.5(A)(2) requires that engineer to seal each sheet of engineering drawings, the cover, title or contents pages of bound specifications and the title or signature page of engineering reports, with the signature and date appearing through the seal under Rule 1.5(A)(3). Where geotechnical or geologic findings are bound into an engineering report, that engineer is responsible for the entire document.
How does my geology work get attributed on a Colorado engineering report?
Through the written scope note the rules allow. Under 4 CCR 730-1 Rule 1.5(A)(2), the engineer sealing an engineering report is responsible for the whole document unless a written note adjacent to the seal limits the scope to named disciplines. That note is the proper way a Colorado engineering report attributes the geology, and it does more for you than any seal you could buy.
Does Colorado have an electronic seal standard I should follow?
Not one that reaches you. The electronic signature standard at 4 CCR 730-1 Rule 1.2(B), which names public key infrastructure and signature dynamics technology, applies to the architects, engineers and land surveyors the board licenses. Colorado sets no electronic signing standard for geologists because it sets no signing standard for them at all, so a graphic of your own stamp in a PDF is simply a graphic.
Does a Colorado geology firm need a certificate of authorization?
No, and neither does any other design firm in Colorado. The state registers no design or geoscience firms: there is no certificate of authorization under Article 120 for engineering, surveying or architecture firms, none under Article 130 for landscape architecture, and nothing for geology. A Colorado geology consultancy holds no board credential and no seal.
What should I leave off a Colorado geologist stamp?
Anything that reads as a Colorado credential. Keep “Licensed” and “Registered” standing alone off, keep STATE OF COLORADO set in a ring off, and keep off a bare number formatted the way a license number is formatted. Naming your actual credential and the state that issued it is accurate and carries no such implication.































