Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Kansas State Board of Technical Professions and Kan. Stat. Ann. §§ 74-7023(d), 74-7042a on 21 September 2026 · Updated 21 September 2026
Kansas hands geologists the identical seal its engineers, architects, landscape architects and surveyors use: an outer circle of 1 5/8 inches and an inner circle of 1 1/16 inches. K.A.R. 66-6-1(a) sets both figures and the layout, with LICENSED at the top of the inner circle, KANSAS at the bottom, your license certificate number centered inside, your name in the upper ring and PROFESSIONAL GEOLOGIST in the lower ring. Kansas is unusual among geology-licensing states in specifying an inner circle diameter at all.
Every engineering-style obligation comes with it, starting with a deadline. K.A.R. 66-6-1(a) requires the seal within 30 days of the license being issued, and K.S.A. 74-7023(d) requires each licensee to “obtain a seal of a distinctive design authorized by the board, bearing the licensee’s name and number and a uniform inscription formulated by the board.” K.A.R. 66-6-1(b)(1) then requires “the licensee’s handwritten or authenticated digital signature and the date across the seal,” so leave the center open enough for both to cross the impression.
The geology practice exemption sits in its own statute, K.S.A. 74-7042a, separate from the architecture, landscape architecture, engineering and surveying exemptions. Reasoning from the engineering exemption will give you the wrong scope.
Kansas geologist seal requirements at a glance
| Requirement | Kansas rule | Source |
|---|---|---|
| Seal required | Yes | Kan. Stat. Ann. §§ 74-7023(d), 74-7042a |
| Required elements | Two concentric circles, Your name as it appears on your license, The words PROFESSIONAL GEOLOGIST in the lower ring, The word LICENSED, The word KANSAS and Your license certificate number | Kan. Admin. Regs. 66-6-1(a) |
| Size and shape | Outer circle 1 5/8 inches in diameter, inner circle 1 1/16 inches in diameter. | Kan. Admin. Regs. 66-6-1(a) |
| Device allowed | K.A.R. 66-6-1(a): “The seal may be a rubber stamp, an embossed seal, or a digital seal.” A rubber stamp is the safe buy, because geology reports circulate as photocopies and PDFs and an unpigmented embossed. | Kan. Admin. Regs. 66-6-1(a) |
| Signature and date | K.A.R. 66-6-1(b)(1) requires “the licensee’s handwritten or authenticated digital signature and the date across the seal.” The seal, signature and date together certify that the document was created by. | Kan. Admin. Regs. 66-6-1(b)(1) |
| What must be sealed | K.A.R. 66-6-1(c)(1) reaches each document, including drawings, technical reports, records and papers, subject to the statutory practice exemptions; for geology the exemption is K.S.A. 74-7042a. | Kan. Admin. Regs. 66-6-1(c), (d), (e) |
| Electronic seal | K.A.R. 66-6-1(b)(3) requires the digital signature to be unique to the licensee, verifiable, under the licensee’s sole control and linked to the document so that any alteration invalidates it. | Kan. Admin. Regs. 66-6-1(b)(3), (4) |
| Renewal and lapse | K.S.A. 74-7023(d) makes it unlawful to stamp any document after the license has expired or been revoked unless it has been renewed or reissued. | Kan. Stat. Ann. § 74-7023(d) |
| Firm requirements | A certificate of authorization is required, but the firm number stays off the report. | Kan. Stat. Ann. § 74-7036 |
| Regulator | The Kansas State Board of Technical Professions | Kan. Stat. Ann. §§ 74-7003, 74-7023, 74-7036 and 74-7042a, from the Kansas Office of Revisor of Statutes, with Kan. Admin. Regs. 66-6-1 (as amended 4 Dec. 2020), 66-6-4 and 66-6-10, and the Kansas State Board of Technical Professions Seal FAQ. |
Is a seal required in Kansas?
Kansas licenses professional geologists through the same board and the same seal rule as its other technical professions. K.S.A. 74-7023(d) requires each licensee to “obtain a seal of a distinctive design authorized by the board, bearing the licensee’s name and number and a uniform inscription formulated by the board,” and requires documents signed in a professional capacity to be stamped with it for the duration of the license. K.A.R. 66-6-1(a) requires the seal within 30 days of issuance, and K.A.R. 66-6-1(c)(1) requires each document to be sealed, signed and dated by the geologist who prepared it or is in responsible charge, subject to the geology practice exemption in K.S.A. 74-7042a.
What must appear on the seal
- Two concentric circles
- Your name as it appears on your license
- The words PROFESSIONAL GEOLOGIST in the lower ring
- The word LICENSED
- The word KANSAS
- Your license certificate number
The layout is fixed by K.A.R. 66-6-1(a) and is the same for all five Kansas technical professions: “LICENSED” at the top of the inner circle, “KANSAS” at the bottom, the certificate number centered inside, your name in the upper ring and the profession in the lower ring. The given name may be abbreviated or reduced to initials; the surname may not. The board’s Seal FAQ fixes this legend as PROFESSIONAL GEOLOGIST.
Size and shape
Outer circle 1 5/8 inches in diameter, inner circle 1 1/16 inches in diameter. K.A.R. 66-6-1(a) states both figures, and the board’s Seal FAQ repeats them. Kansas is unusual among geology-licensing states in specifying an inner circle diameter at all.
Embosser, rubber stamp or digital
K.A.R. 66-6-1(a): “The seal may be a rubber stamp, an embossed seal, or a digital seal.” A rubber stamp is the safe buy, because geology reports circulate as photocopies and PDFs and an unpigmented embossed impression does not survive either.
Signing and dating
K.A.R. 66-6-1(b)(1) requires “the licensee’s handwritten or authenticated digital signature and the date across the seal.” The seal, signature and date together certify that the document was created by you or under your responsible charge.
Kansas geologists are held to an engineering-style seal rule, deadline and all
Most states that license geologists treat the seal loosely, or put geology under a natural resources agency with a permissive stamp rule. Kansas does the opposite. K.S.A. 74-7003 lists professional geology as one of five technical professions, and K.A.R. 66-6-1 hands geologists the identical seal that Kansas engineers, architects, landscape architects and surveyors use: outer circle 1 5/8 inches, inner circle 1 1/16 inches, LICENSED over the number over KANSAS in the center, name above and PROFESSIONAL GEOLOGIST below in the ring.
Every engineering-style obligation comes with it. You must obtain the seal within 30 days of the license being issued under K.A.R. 66-6-1(a). You must sign and date across the impression rather than beside it under K.A.R. 66-6-1(b)(1). Your reports are sealed on the first or last page under K.A.R. 66-6-1(d)(1), and preliminary work escapes only if it is labeled PRELIMINARY, NOT FOR CONSTRUCTION, RECORDING PURPOSES, OR IMPLEMENTATION or words of comparable meaning.
Note also that the geology practice exemption sits in its own statute, K.S.A. 74-7042a, separate from the architecture, landscape architecture, engineering and surveying exemptions. Reasoning from the engineering exemption will give you the wrong scope.
Which documents must be sealed
K.A.R. 66-6-1(c)(1) reaches each document, including drawings, technical reports, records and papers, subject to the statutory practice exemptions; for geology the exemption is K.S.A. 74-7042a. K.A.R. 66-6-1(c)(2) covers documents submitted to a public or governmental agency, a client or a user for final approval or recording, plus each revision. K.A.R. 66-6-1(d)(1) puts the seal on the first or last page of a technical report, and on every sheet of a drawing set unless a digital authentication process links all sheets. K.A.R. 66-6-1(e) exempts documents labeled “PRELIMINARY, NOT FOR CONSTRUCTION, RECORDING PURPOSES, OR IMPLEMENTATION” or words of comparable meaning.
Electronic and digital seals
K.A.R. 66-6-1(b)(3) requires the digital signature to be unique to the licensee, verifiable, under the licensee’s sole control and linked to the document so that any alteration invalidates it. No certificate authority is named. K.A.R. 66-6-1(b)(4) requires signature, date of signing and seal on every transmitted or stored electronic document and voids them if the document is altered.
Renewal, lapse and retirement
K.S.A. 74-7023(d) makes it unlawful to stamp any document after the license has expired or been revoked unless it has been renewed or reissued. Biennial renewal under K.A.R. 66-6-10(a), with inactive and emeritus statuses that bar practice. The certificate number does not change and the seal carries no date, so no reorder is needed on renewal.
Firm requirements
A certificate of authorization is required, but the firm number stays off the report. K.S.A. 74-7036(a) requires a business entity organized to practice a technical profession to hold a certificate of authorization, designate licensed principals in responsible charge and have a licensed professional regularly supervising each separate office. No rule puts the certificate number or firm name on the sealed document, and the firm has no seal.
What to check before you order
Order the standard Kansas technical-professions design at 1 5/8 inches outside and 1 1/16 inches inside, with LICENSED at the top of the inner circle, KANSAS at the bottom, your license certificate number centered, your name in the upper ring and PROFESSIONAL GEOLOGIST in the lower ring. Do not let a supplier substitute a generic geology template from another state; Kansas geometry and wording are fixed. Spell out your surname, choose your device from rubber stamp, embosser or digital seal, and leave the center open so a signature and date can cross the impression. Order within 30 days of licensure.
Browse geologist stamps and seals.
Frequently asked questions
Is a geologist seal required in Kansas?
Yes, and within a deadline. K.S.A. 74-7023(d) requires documents signed in a professional capacity to be stamped for the duration of the license, K.A.R. 66-6-1(a) requires you to obtain the seal within 30 days of issuance, and K.A.R. 66-6-1(c)(1) requires each document to be sealed, signed and dated by the geologist who prepared it or is in responsible charge, subject to the geology practice exemption in K.S.A. 74-7042a.
What size is a Kansas geologist seal?
Outer circle 1 5/8 inches in diameter, inner circle 1 1/16 inches. K.A.R. 66-6-1(a) states both figures and the board’s Seal FAQ repeats them. Specifying an inner circle diameter is unusual among geology-licensing states, so do not let a supplier build to the outer figure alone.
What wording goes on it?
LICENSED at the top of the inner circle, KANSAS at the bottom, your certificate number centered, your name in the upper ring and PROFESSIONAL GEOLOGIST in the lower ring. The board’s Seal FAQ fixes that legend. Your given name may be abbreviated or reduced to initials; your surname may not.
Rubber stamp, embosser or digital seal?
All three. K.A.R. 66-6-1(a) provides that “The seal may be a rubber stamp, an embossed seal, or a digital seal.” A rubber stamp is the practical buy, because geology reports circulate as photocopies and PDFs and an unpigmented embossed impression survives neither.
Where do the signature and date go?
Across the seal, not beside it. K.A.R. 66-6-1(b)(1) requires “the licensee’s handwritten or authenticated digital signature and the date across the seal,” and the seal, signature and date together certify that the document was created by you or under your responsible charge. Order a die with enough open center for both to land legibly.
Which documents have to be sealed?
Each document, including drawings, technical reports, records and papers, under K.A.R. 66-6-1(c)(1) and subject to the statutory practice exemptions. K.A.R. 66-6-1(c)(2) covers documents submitted to a public or governmental agency, a client or a user for final approval or recording, plus each revision. K.A.R. 66-6-1(d)(1) puts the seal on the first or last page of a technical report and on every sheet of a drawing set unless a digital authentication process links all sheets.
What about preliminary work?
Label it. K.A.R. 66-6-1(e) exempts documents labeled “PRELIMINARY, NOT FOR CONSTRUCTION, RECORDING PURPOSES, OR IMPLEMENTATION” or words of comparable meaning. Without one of those labels the document is inside the sealing duty.
How does digital sealing work in Kansas?
K.A.R. 66-6-1(b)(3) requires the digital signature to be unique to the licensee, verifiable, under the licensee’s sole control and linked to the document so that any alteration invalidates it. No certificate authority is named. K.A.R. 66-6-1(b)(4) requires the signature, the date of signing and the seal on every transmitted or stored electronic document, and voids them if the document is altered.
Does my Kansas seal need replacing at renewal?
No. The certificate number does not change and the seal carries no date, so renewal needs no reorder. Renewal is biennial under K.A.R. 66-6-10(a), with inactive and emeritus statuses that bar practice, and K.S.A. 74-7023(d) makes it unlawful to stamp any document after the license has expired or been revoked unless it has been renewed or reissued.
Does a Kansas geology firm need a certificate of authorization?
Yes, and the firm number stays off the report. K.S.A. 74-7036(a) requires a business entity organized to practice a technical profession to hold a certificate of authorization, designate licensed principals in responsible charge and have a licensed professional regularly supervising each separate office. No rule puts the certificate number or the firm name on the sealed document, and the firm has no seal of its own.































