Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Louisiana Professional Engineering and Land Surveying Board and LAC 46:LXI § 2701 on 21 September 2026 · Updated 21 September 2026
Louisiana recognizes exactly two seal diameters, a 1-5/8 inch pocket seal and a 2 inch desk seal. LAC 46:LXI § 2701.A.2 frames them as a pair of permitted sizes rather than a range with a tolerance, and rubber and computer generated versions are acceptable only where they are of the same design and size as the authorized design. A 1-3/4 inch blank, which is the right answer in several neighboring jurisdictions, is not a Louisiana size.
Two more things catch out-of-state engineers. A licensee admitted by endorsement carries an extra line on the face, Licensed by Endorsement, R.S. 37:51 et seq., and LAPELS publishes separate sample artwork for endorsement engineers and endorsement land surveyors for that reason. And firms get nothing: § 2701.A.1 says flatly that “Firms are not authorized to possess or use seals.”
Watch the calendar as well as the die. La. R.S. 37:697 preserves the right of renewal for 120 days after expiration, but R.S. 37:698(A)(9) makes it a disciplinary offense to use a seal once a license has been expired for more than ninety days. That leaves a thirty day window in which the license is still renewable and the seal is already dead.
Louisiana PE seal requirements at a glance
| Requirement | Louisiana rule | Source |
|---|---|---|
| Seal required | Yes | LAC 46:LXI § 2701 |
| Required elements | State of Louisiana; Your name; Your license number; Professional Engineer, or Professional Engineer in a named discipline, or Professional Land Surveyor; Licensed by Endorsement, R.S. 37:51 et seq., where you were licensed by endorsement | LAC 46:LXI § 2701.A.2 |
| Size and shape | Two sizes, and only two: a 1-5/8 inch seal and a 2-inch seal. | LAC 46:LXI § 2701.A.2 |
| Device allowed | Section 2701.A.2 states that “Rubber seals of the same design and size are acceptable for use” and that “Computer-generated seals of the same design and size may be used.” The governing constraint is that phrase, same design and size, measured against the authorized design. | LAC 46:LXI § 2701.A.2 |
| Signature and date | A seal on its own is never sufficient in Louisiana. | LAC 46:LXI § 2701.A.2 |
| What must be sealed | Section 2701 is organized as Seal Possession, Seal Design and Signature Requirements, Seal Responsibility, Seal Use and Electronic Transmission. | LAC 46:LXI § 2701.A.4 |
| Electronic seal | Section 2701.A.5 governs electronic transmission and prescribes the replacement wording verbatim: “This document was originally issued and sealed by (name of licensee and license number) on (date of sealing). | LAC 46:LXI § 2701.A.5 |
| Renewal and lapse | La. | La. R.S. 37:697 |
| Firm number on documents | Louisiana licenses firms, and R.S. 37:697 expressly contemplates “Renewal of licensure as a professional engineer, professional land surveyor, or firm”. But the firm gets nothing to stamp with. | LAC 46:LXI § 2701.A.1 |
| Licensing board | The Louisiana Professional Engineering and Land Surveying Board | LAC Title 46, Part LXI, Chapter 27 (§ 2701, Seal |
Rules for other states are on PE stamp requirements by state.
Is a seal required in Louisiana?
Louisiana requires a seal Louisiana puts the duty in the board rule and backs it with the statute. LAC 46:LXI § 2701 provides that “Each professional engineer or professional land surveyor, upon licensure, shall obtain an official seal”, and that “A seal must always be accompanied by the licensee's signature and date.” Sealing is not optional paperwork: La. R.S. 37:698(A)(6) makes violation of any board rule a ground for discipline, and R.S. 37:698(A)(9) makes using a seal while a license is suspended, revoked, expired for more than ninety days, or in retired or inactive status, a disciplinary offense in its own right. On multi-sheet work the rule requires the first sheet or title page to be sealed, signed and dated by the licensee or licensees in responsible charge of the whole project, and in addition each other sheet to be sealed, signed and dated by the licensee in responsible charge of the work on that sheet.
What must appear on the seal
- State of Louisiana
- Your name
- Your license number
- Professional Engineer, or Professional Engineer in a named discipline, or Professional Land Surveyor
- Licensed by Endorsement, R.S. 37:51 et seq., where you were licensed by endorsement
The discipline line is optional, and that is statutory rather than a matter of custom: La. R.S. 37:693(A)(2) says the professional engineer “may use a seal that designates the discipline of engineering in which the board has listed the professional engineer or a seal that identifies the licensee as a professional engineer.” Either is lawful. The endorsement legend is the opposite of optional: a licensee admitted by endorsement carries the Licensed by Endorsement line, and LAPELS publishes separate sample designs for endorsement engineers and endorsement land surveyors for exactly that reason. The word expiration does not appear in § 2701 at all, so no expiration date belongs on the device.
Size and shape
Two sizes, and only two: a 1-5/8 inch seal and a 2-inch seal. Section 2701.A.2 frames them as the pocket size and the desk size respectively. This is not a range with a tolerance, it is a pair of permitted diameters, which makes Louisiana unusually easy to get wrong with a blank sized for a neighboring state. Both figures were confirmed on two separately phrased readings of the Board's Chapter 27 rule document.
Embosser, rubber stamp or digital
Section 2701.A.2 states that “Rubber seals of the same design and size are acceptable for use” and that “Computer-generated seals of the same design and size may be used.” The governing constraint is that phrase, same design and size, measured against the authorized design. The words embossed and embossing do not appear anywhere in § 2701, although the rule's reference to a pocket seal describes the crimp format. The safe buy is a rubber stamp in one of the two authorized diameters.
Signing and dating
A seal on its own is never sufficient in Louisiana. Section 2701.A.2 requires that “A seal must always be accompanied by the licensee's signature and date” and fixes the geometry: “The signature and date must be placed adjacent to or across the seal.” Signing across the impression is permitted, not mandatory; adjacent is equally compliant. The date is the date the licensee signs.
Licensed by Endorsement is part of the seal, and leaving it off is the most common Louisiana defect
A licensee admitted by endorsement in Louisiana carries an extra line on the face of the device: Licensed by Endorsement, R.S. 37:51 et seq. LAPELS publishes separate sample artwork for endorsement engineers and endorsement land surveyors precisely because the design is not the same as the ordinary one. An out of state engineer who gets a Louisiana license by endorsement and orders a stamp from the design he used in his home state ends up with a device that is missing a required line.
Which documents must be sealed
Section 2701 is organized as Seal Possession, Seal Design and Signature Requirements, Seal Responsibility, Seal Use and Electronic Transmission. Under Seal Use the first sheet or title page carries the seal of the licensee in responsible charge of the whole project and every other sheet carries the seal of the licensee responsible for that sheet. The rule bars sealing work developed by others: “No licensee shall affix his/her seal or signature to documents developed by others not under his/her responsible charge, except” for four enumerated situations. Preliminary work is carved out by labeling rather than by omission of the seal: all preliminary documents must be marked in large bold letters with one or more of the statements Preliminary Not For Construction, Preliminary For Permit Purposes Only, Preliminary For Review Only, or Preliminary Not For Recordation, Conveyances or Sales.
Electronic and digital seals
Section 2701.A.5 governs electronic transmission and prescribes the replacement wording verbatim: “This document was originally issued and sealed by (name of licensee and license number) on (date of sealing). This document should not be considered a completed work.” Louisiana does not name a cryptographic standard in § 2701 and does not incorporate a federal digital signature specification the way Connecticut does. The conditions attaching to electronic transmission should be read off the current text of § 2701.A.5 before they are restated in any customer-facing copy.
Renewal, lapse and retirement
La. R.S. 37:697 sets expiration and renewal and gives a grace: “Any person who renews his license or certificate within one hundred twenty days of the expiration of such license or certificate shall not be deprived of the right of renewal.” The seal rule bites sooner than that. R.S. 37:698(A)(9) makes it a disciplinary offense to use a seal or stamp when a license is suspended or revoked, when it has been expired for more than ninety days, or when the licensee is in retired or inactive status. So there is a thirty day window between the point at which the seal goes dead and the point at which the renewal right lapses. R.S. 37:698(A)(16) separately reaches use of an expired, inactive, retired or revoked license. Whether the license number changes on reinstatement, and whether the physical device must be destroyed or surrendered, are not addressed; checked LAC 46:LXI § 2701 in full and La. R.S. 37:697, 37:698 and 37:700.
Firm registration
Louisiana licenses firms, and R.S. 37:697 expressly contemplates “Renewal of licensure as a professional engineer, professional land surveyor, or firm”. But the firm gets nothing to stamp with. Section 2701.A.1 is blunt: “Firms are not authorized to possess or use seals.” The rule does not require the firm's license number to appear on the sealed document either, which is the reverse of Georgia. A Louisiana stamp is a personal instrument and nothing else.
What to check before you order
Pick one of the two authorized diameters, 1-5/8 inch or 2 inch, and nothing in between. The required lines are State of Louisiana, your name, your license number, and either Professional Engineer, Professional Engineer in a named discipline, or Professional Land Surveyor; if you were licensed by endorsement, that adds the line Licensed by Endorsement, R.S. 37:51 et seq. Rubber and computer generated devices are lawful only if the design and size match the authorized design. Do not order a firm seal, because LAPELS rules say firms are not authorized to possess or use seals. LAPELS publishes a vendor list as information only and does not endorse or guarantee anyone on it, imposes no proof-of-licensure requirement, and treats a deceptively similar seal as an enforcement matter under R.S. 37:700(A)(6).
Browse professional engineer stamps and seals.
- Use of a Louisiana Professional Engineer Seal Stamp Indicates Professionalism
- Get Your Louisiana Engineer Stamp Online in Minutes
Frequently asked questions
What size is a Louisiana PE seal?
1-5/8 inches or 2 inches, and nothing in between. LAC 46:LXI § 2701.A.2 recognizes the 1-5/8 inch device as the pocket size and the 2 inch device as the desk size. The board does not publish a tolerance band, so a die cut to a general-purpose diameter is not compliant simply for being close. Both figures were confirmed on two separately phrased readings of the board’s Chapter 27 rule document.
Do I need a seal to practice engineering in Louisiana?
Yes. LAC 46:LXI § 2701 provides that “Each professional engineer or professional land surveyor, upon licensure, shall obtain an official seal” and that “A seal must always be accompanied by the licensee’s signature and date.” The rule is backed by statute rather than left as housekeeping: La. R.S. 37:698(A)(6) makes violation of any board rule a ground for discipline, and R.S. 37:698(A)(9) makes misuse of a seal a disciplinary offense in its own right.
What has to appear on a Louisiana PE seal?
State of Louisiana, your name, your license number, and either Professional Engineer, Professional Engineer in a named discipline, or Professional Land Surveyor. A licensee admitted by endorsement also carries the line Licensed by Endorsement, R.S. 37:51 et seq. The word expiration does not appear in § 2701 at all, so no expiration date belongs on the device.
Does my Louisiana seal have to name my engineering discipline?
No, and the choice is statutory rather than customary. La. R.S. 37:693(A)(2) provides that a professional engineer “may use a seal that designates the discipline of engineering in which the board has listed the professional engineer or a seal that identifies the licensee as a professional engineer.” Either is lawful. Buyers often assume one form or the other is mandatory; neither is.
Do I need the Licensed by Endorsement line on my seal?
Yes, if you were licensed by endorsement. That is the most common Louisiana defect: an engineer admitted by endorsement orders a stamp from the design used in the home state and ends up with a device missing a required line. LAPELS publishes separate sample designs for endorsement engineers and endorsement land surveyors precisely because the face is not the same as the ordinary one.
Embosser, rubber stamp or computer generated seal in Louisiana?
Rubber and computer generated devices are both named. § 2701.A.2 states that “Rubber seals of the same design and size are acceptable for use” and that “Computer-generated seals of the same design and size may be used.” The governing phrase is same design and size, measured against the authorized design. The words embossed and embossing do not appear anywhere in § 2701, although the rule’s reference to a pocket seal describes the crimp format. A rubber stamp in one of the two authorized diameters is the safe buy.
Where do the signature and date go on a Louisiana seal?
Adjacent to the seal or across it, either way. § 2701.A.2 requires that “A seal must always be accompanied by the licensee’s signature and date” and that “The signature and date must be placed adjacent to or across the seal.” Signing across the impression is permitted, not mandatory. The date is the date the licensee signs.
Which sheets have to be sealed in Louisiana?
All of them, with two different responsibilities. Under the Seal Use part of § 2701, the first sheet or title page is sealed, signed and dated by the licensee or licensees in responsible charge of the whole project, and every other sheet is sealed, signed and dated by the licensee in responsible charge of the work on that sheet. The rule bars sealing documents developed by others not under the licensee’s responsible charge, subject to four enumerated exceptions. Preliminary work is not exempt from the seal so much as labeled: preliminary documents must be marked in large bold letters with one or more of Preliminary Not For Construction, Preliminary For Permit Purposes Only, Preliminary For Review Only, or Preliminary Not For Recordation, Conveyances or Sales.
Can my engineering firm have a Louisiana seal?
No. § 2701.A.1 states that “Firms are not authorized to possess or use seals.” Louisiana does license firms, and La. R.S. 37:697 expressly contemplates renewal of licensure as a professional engineer, professional land surveyor or firm, but the firm receives nothing to stamp with. The rule does not require the firm license number on the sealed document either. A Louisiana stamp is a personal instrument and nothing else.
What happens to my Louisiana seal when my license expires?
It stops being usable before the license stops being renewable. La. R.S. 37:697 provides that “Any person who renews his license or certificate within one hundred twenty days of the expiration of such license or certificate shall not be deprived of the right of renewal.” R.S. 37:698(A)(9) makes it a disciplinary offense to use a seal or stamp when a license is suspended or revoked, when it has been expired for more than ninety days, or when the licensee is in retired or inactive status, and R.S. 37:698(A)(16) separately reaches use of an expired, inactive, retired or revoked license. Whether the license number changes on reinstatement, and whether the physical device must be destroyed or surrendered, are not addressed; LAC 46:LXI § 2701 was read in full along with La. R.S. 37:697, 37:698 and 37:700.
What wording goes on a Louisiana document transmitted electronically?
§ 2701.A.5 prescribes it verbatim: “This document was originally issued and sealed by (name of licensee and license number) on (date of sealing). This document should not be considered a completed work.” Louisiana names no cryptographic standard in § 2701 and incorporates no federal digital signature specification, so the conditions attaching to electronic transmission should be read off the current text of § 2701.A.5 rather than assumed from another state.
Can someone who is not licensed order a Louisiana style seal?
It is an enforcement matter. La. R.S. 37:700(A)(6) lets the board act against a non-licensee for “Using or attempting to use a seal or stamp which is deceptively similar to the seals or stamps authorized by the board for use by its licensees.” That provision reaches people who hold no license at all, which matters for anyone producing sample or display devices. LAPELS publishes a vendor list as information only, does not endorse or guarantee any vendor, and imposes no proof-of-licensure requirement on the purchase itself.































