Maine Geologist Seal with state geologist stamp, place name, and license number on white background, part of the Geologist Seal Guide.

Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Maine State Board of Licensure of Geologists and Soil Scientists and 32 M.R.S. § 4918 on 21 September 2026 · Updated 21 September 2026

Maine licenses geologists and requires a signature rather than a seal. The authentication section is 32 M.R.S. § 4918, headed Plans prepared, and it reads: “All geologic plans, specifications, reports or documents that are prepared by a licensed geologist or by a subordinate under the licensed geologist’s direction must be signed by the licensed geologist, which indicates the licensed geologist’s responsibility for them.” There is no seal section anywhere in 32 M.R.S. ch. 73, and the board’s five published rule chapters, Definitions, General Information, Code of Ethics, Certification Requirements, and Complaints, Investigations and Adjudicatory Hearings, contain no seal provision at all.

That leaves the object entirely open. Because Maine prescribes no seal, no wording is authorized and no wording is prohibited, no diameter is set and no device type is named. If you want a stamp for convenience, it is a design decision rather than a compliance one, and Acorn will cut it to whatever you want on it. The natural content is the true one: your name, the words Licensed Geologist and your Maine license number, paired with the signature the statute actually requires.

Use the current vocabulary. Maine moved from certified to licensed in 2019, so the credential is a Licensed Geologist and the board is the State Board of Licensure of Geologists and Soil Scientists. A device reading Certified Geologist describes the old wording, and Registered Professional Geologist describes what Alabama, Arkansas, Kentucky and Mississippi issue rather than what Maine does. Put your own name, your firm name, and the credential Maine actually issued you, and leave another state’s title off.

Maine geologist seal requirements at a glance

Requirement Maine rule Source
Seal required No seal prescribed 32 M.R.S. § 4918
Required elements Maine prescribes no geologist seal; the document carries your signature as the licensed geologist 32 M.R.S. § 4918
Size and shape No dimension exists. 32 M.R.S. ch. 73 (no seal section)
Device allowed Not a regulated purchase. 32 M.R.S. § 4918 (signature requirement, no device prescribed)
Signature and date Signature only. 32 M.R.S. § 4918 (silent as to date and placement)
What must be sealed All geologic plans, specifications, reports or documents prepared by the licensed geologist or by a subordinate under the geologist’s direction. 32 M.R.S. §§ 4904, 4906, 4906-A, 4918
Electronic seal Not addressed. Chapter 73 contains no electronic or digital signature provision for geologists and names no technology, certificate authority or verification standard, and the board’s rules contain none either. We. 32 M.R.S. ch. 73 (no electronic provision)
Renewal and lapse Expiration and renewal sit at 32 M.R.S. § 4911, fees at § 4912, and denial or refusal to renew and disciplinary action at § 4913. 32 M.R.S. §§ 4911, 4912, 4913, 4919
Firm requirements Not applicable as a seal matter. 32 M.R.S. § 4904
Regulator The Maine State Board of Licensure of Geologists and Soil Scientists 32 M.R.S. ch. 73 (Geologists and Soil Scientists), §§ 4901 through 4920, principally § 4918 (Plans prepared), § 4904, § 4906, § 4911, § 4913 and § 4919, read from the Maine Legislature’s published statutes, with §§ 4905, 4910, 4914, 4915, 4916, 4917 and 4920 repealed

Is a seal required in Maine?

Maine licenses geologists and requires a signature rather than a seal. 32 M.R.S. § 4918, headed Plans prepared, is the authentication section and it reads: “All geologic plans, specifications, reports or documents that are prepared by a licensed geologist or by a subordinate under the licensed geologist’s direction must be signed by the licensed geologist, which indicates the licensed geologist’s responsibility for them.” The parallel sentence for soil scientists covers soil science maps, reports or documents. There is no seal section anywhere in 32 M.R.S. ch. 73 and no seal provision in the board’s rules.

What must appear on the seal

  • Maine prescribes no geologist seal; the document carries your signature as the licensed geologist

Because there is no prescribed seal, there is no authorized wording and no prohibited wording on a device. Maine changed its vocabulary in 2019 from certified to licensed, so the credential is a Licensed Geologist and the board is the State Board of Licensure of Geologists and Soil Scientists. A device built around the old certified wording, or around the Registered Professional Geologist legend used in Alabama, Arkansas, Kentucky and Mississippi, describes something Maine does not issue.

Size and shape

No dimension exists. Maine prescribes no geologist seal, so there is no diameter to state. The sources here are 32 M.R.S. ch. 73, §§ 4901 through 4920, and read 02-070 C.M.R. chapters 1 (Definitions), 2 (General Information), 3 (Code of Ethics), 4 (Certification Requirements) and 6 (Complaints, Investigations and Adjudicatory Hearings), searching each for the word seal; none of the five contains it.

Embosser, rubber stamp or digital

Not a regulated purchase. Any device a Maine licensed geologist uses is an identification stamp, not a professional seal. If you want one for convenience, keep it to your name, the words Licensed Geologist and your Maine license number, because those are the facts a reader needs, and pair it with the signature the statute actually requires. Do not letter it in a way that implies engineering or land surveying licensure: 32 M.R.S. § 18226(1)(C) bars officials from accepting plans not sealed and signed by a professional land surveyor, and the Maine engineers’ board runs its own seal regime under 02-322 C.M.R.

Signing and dating

Signature only. Section 4918 requires geologic plans, specifications, reports or documents prepared by the licensed geologist, or by a subordinate under the geologist’s direction, to be signed by the licensed geologist, and states that the signature indicates responsibility for them. Not addressed: a date requirement, a placement rule, and any seal. The sources here are §§ 4901 through 4920 and searched 02-070 C.M.R. chapters 1, 2, 3, 4 and 6 for any seal or signature-placement provision.

Maine licenses geologists and prescribes no seal for them

This is the finding most likely to contradict what a supplier or a client expects. Maine has a State Board of Licensure of Geologists and Soil Scientists, it issues a Licensed Geologist credential, and 32 M.R.S. ch. 73 contains no seal section. The authentication provision is § 4918, and it requires a signature. We searched the board’s five published rule chapters, Definitions, General Information, Code of Ethics, Certification Requirements and Complaints, Investigations and Adjudicatory Hearings, for the word seal and found it in none of them.

Which documents must be sealed

All geologic plans, specifications, reports or documents prepared by the licensed geologist or by a subordinate under the geologist’s direction. Note the reach: work done by a subordinate under direction is caught, and there is no preliminary or draft carve-out in the section. 32 M.R.S. § 4904 addresses corporations, partnerships, associations and government agencies, § 4906 carries the exemptions and § 4906-A deals with subsurface wastewater disposal. Sections 4905, 4910, 4914, 4915, 4916, 4917 and 4920 are repealed, so guidance citing them is stale.

Electronic and digital seals

Not addressed. Chapter 73 contains no electronic or digital signature provision for geologists and names no technology, certificate authority or verification standard, and the board’s rules contain none either. We searched 02-070 C.M.R. chapters 1, 2, 3, 4 and 6. Note that Maine does address electronic reliance for its architects, landscape architects and certified interior designers at 02-288 C.M.R. ch. 18 s. 3; that belongs to a different board. Treat a claimed Maine electronic geologist sealing standard as unverified.

Renewal, lapse and retirement

Expiration and renewal sit at 32 M.R.S. § 4911, fees at § 4912, and denial or refusal to renew and disciplinary action at § 4913. Because Maine prescribes no seal, there is no device to stop using; what a lapse stops is the right to sign as a licensed geologist and to hold out under the protected title, and § 4919 addresses unlicensed practice. Not addressed: whether the license number changes on reinstatement. Checked §§ 4911, 4912, 4913, 4918 and 4919 and the board’s rule chapters.

Firm requirements

Not applicable as a seal matter. Maine issues no geology firm registration, certificate of authorization or firm seal. What chapter 73 does contain is § 4904, addressing corporations, partnerships, associations and government agencies, which is a practice provision rather than a credential for an entity. Because § 4918 requires the individual licensed geologist to sign work prepared by a subordinate under that geologist’s direction, responsibility runs to the person, not the entity.

What to check before you order

Maine prescribes no seal for a licensed geologist, so there is nothing you are required to buy. If you want a stamp for convenience, keep it to your name, the words Licensed Geologist and your Maine license number, and understand that it has no statutory effect. What the statute requires is your signature on all geologic plans, specifications, reports or documents you prepared, and on those a subordinate prepared under your direction, because the signature is what indicates your responsibility for them. Use the current Maine vocabulary, which is licensed rather than certified. Keep engineering and land surveying language off any device, because those professions have their own Maine sealing rules under separate boards.

Browse geologist stamps and seals.

More on this topic

Frequently asked questions

Is a geologist seal required in Maine?

No. 32 M.R.S. ch. 73 has no seal section, and the authentication provision at § 4918 requires a signature instead. Nothing in the board’s rules supplies one either: chapters 1 through 6 of 02-070 C.M.R. were read for the word seal and none of them contains it.

What does Maine require on a geologic report?

Your signature as the licensed geologist. Section 4918 requires it on all geologic plans, specifications, reports or documents you prepared, and on those a subordinate prepared under your direction, and states that the signature is what indicates your responsibility for them. There is no preliminary or draft carve-out in the section.

Does Maine require a date beside the signature?

The statute does not say. Section 4918 requires the signature and stops there: no date requirement, no placement rule and no seal. Sections 4901 through 4920 and the board’s rule chapters were read for any such provision and none appears, so dating is your own practice rather than a requirement.

What can I put on a Maine geologist stamp?

Whatever is true of you. Your name as you use it professionally, the words Licensed Geologist, your Maine license number, your firm name and contact details. Since no rule prescribes a layout, the shape and size are yours. Understand that the device has no statutory effect, so it supplements your signature rather than replacing it.

What size and shape should it be?

Any size and any shape, because no dimension exists. Because nothing is prescribed, the size is yours. The round dies Acorn makes most often for unregulated devices fall between 1-1/2 and 2 inches, which is a legibility judgment from our own production rather than any rule.

What should I keep off it?

Engineering and land surveying language, and the old Maine wording. Those professions have their own Maine sealing regimes under separate boards, and 32 M.R.S. § 18226(1)(C) bars officials from accepting plans not sealed and signed by a professional land surveyor. Keep the device to the credential Maine issued you, spelled the way Maine now spells it.

Can I sign a Maine geologic report electronically?

Chapter 73 contains no electronic or digital signature provision for geologists and names no technology, certificate authority or verification standard, and the board’s rules contain none either. Maine does address electronic reliance for its architects, landscape architects and certified interior designers at 02-288 C.M.R. ch. 18 s. 3, which belongs to a different board. Treat a claimed Maine electronic geologist sealing standard as unverified.

Which documents does the signature requirement reach?

All geologic plans, specifications, reports or documents prepared by you or by a subordinate under your direction. Work done by a subordinate is caught, which is the part people miss. Section 4904 addresses corporations, partnerships, associations and government agencies, § 4906 carries the exemptions and § 4906-A deals with subsurface wastewater disposal.

What happens if my Maine license lapses?

There is no device to stop using, because none is prescribed. What a lapse stops is the right to sign as a licensed geologist and to hold out under the protected title, and § 4919 addresses unlicensed practice. Expiration and renewal sit at § 4911, fees at § 4912, and denial, refusal to renew and discipline at § 4913. Whether the license number changes on reinstatement is not stated.

Does a Maine geology firm need a registration?

No. Maine issues no geology firm registration, certificate of authorization or firm seal. Section 4904 addresses corporations, partnerships, associations and government agencies as a practice provision rather than an entity credential, and because § 4918 requires the individual licensed geologist to sign work prepared by a subordinate under their direction, responsibility runs to the person.

Are older citations to the Maine geology statute reliable?

Check the section numbers. Sections 4905, 4910, 4914, 4915, 4916, 4917 and 4920 are repealed, so guidance citing them is stale. The live provisions for this question are § 4918 for signing, § 4904 for entities, § 4906 and § 4906-A for exemptions, and §§ 4911 through 4913 for renewal and discipline.

Acorn Sales Advantages

Made in USAMade in USA
6 Month Stamp Warranty6 Month Stamp Warranty
Free Electronic SealsFree Electronic Seals
FAST 1 Day TurnaroundFAST 1 Day Turnaround
State Board GuaranteeState Board Guarantee
Safe and Secure ShoppingSafe and Secure Shopping