Licensed Professional Geologist certification form with rolled blueprint, yellow ruler, Geologist Stamp Minnesota, and Professional Geology Design for license application.

Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience, and Interior Design and Minn. Stat. § 326.12, subds. 2 and 3 on 21 September 2026 · Updated 21 September 2026

Minnesota does not require a geologist seal. It requires a certification block, and the geologist version of that sentence is not the engineer version with a title swapped in. Minn. R. 1800.4300 says a licensee “may, upon licensure or certification, also obtain a seal,” and that a stamped seal “may be used on documents in addition to the signed and dated certification required under part 1800.4200.” The mandatory item is the certification, under Minn. R. 1800.4200, subp. 1 and Minn. Stat. § 326.12, subd. 3, which requires the signature to be accompanied by a certification, the license number and the date the signature was affixed.

Here is the sentence, from Minn. R. 1800.4200, subp. 4: “I hereby certify that this plan, document, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Geologist under the laws of the state of Minnesota.” Plan, document or report. Architects and engineers certify a plan, specification or report, and surveyors certify a survey, plan or report. Three different objects in one rule, and the only way to get yours right is to copy the geologist entry rather than a template.

Because the seal is optional, nothing about it is prescribed: no diameter appears in Minn. Stat. § 326.12, subd. 2 or in Minn. R. 1800.4300, and the board publishes none. If you want one, it carries your name and the legend “licensed professional geologist,” at whatever size you like, and Acorn will cut it to whatever you specify. The more useful purchase for most Minnesota geologists is a certification block stamp, and the sentence on it has to be the geologist one. Put your own name, your firm name, and the credential Minnesota actually issued you, and leave off another state’s title, because that is the part some states do restrict.

Minnesota geologist seal requirements at a glance

Requirement Minnesota rule Source
Seal required No, but an optional seal is specified Minn. Stat. § 326.12, subds. 2 and 3
Required elements On the optional seal: your name; On the optional seal: the legend “licensed professional geologist”; In the mandatory certification block: the prescribed geologist certification sentence; In the block: your signature; In the block: your typed or printed name; In the block: the date; In the block: your license number Minn. Stat. § 326.12, subds. 2 and 3
Size and shape Not addressed. No dimension appears in Minn. Stat. § 326.12, subd. 2 or in Minn. R. 1800.4300, and the board publishes none. Checked both provisions in full and Minn. R. 1800.4200 in full. There is no legally. Minn. Stat. § 326.12, subd. 2
Device allowed For the optional seal, a regular seal with a rubber stamp facsimile permitted on tracings or on papers that a regular seal would damage. Minn. Stat. § 326.12, subds. 2 and 3
Signature and date Signature, certification, license number and the date the signature was affixed go together. Minn. Stat. § 326.12, subd. 3
What must be sealed Plans, documents and reports prepared under Minn. Stat. §§ 326.02 to 326.15 that require a signature, with the certification page of each report named expressly in Minn. R. 1800.4200, subp. 4a. Minn. Stat. § 326.12, subd. 3
Electronic seal Minn. R. 1800.4200, subp. 1 permits the certification and signature to be “electronic, as defined by Minnesota Statutes, section 325L.02, paragraph (h); facsimile; or digital.” No certificate authority, cryptographic standard or tamper-evidence requirement is named anywhere in the chapter. Minn. R. 1800.4200, subp. 1
Renewal and lapse A seal may be used during the life of an unrevoked, unexpired and unsuspended license, and stamping after expiration, revocation or suspension is unlawful unless the license has been renewed or reissued. Minn. Stat. § 326.12, subd. 2
Firm requirements Minnesota registers firms offering geoscience services along with the board’s other professions and issues a Firm Registration certificate, with professional firm status under Minn. Stat. ch. 319B available separately. Minn. Stat. ch. 319B
Regulator The Minnesota Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience, and Interior Design Minn. Stat. §§ 326.02, 326.03 and 326.12, with Minn. R. 1800.4200 and 1800.4300, from the Minnesota Office of the Revisor of Statutes, and the board’s firm licensure information. Professional geologists share both rules with six other credentials and diverge in the certification sentence and the prescribed legend.

Is a seal required in Minnesota?

Minnesota licenses professional geologists through the same board as its architects and engineers and applies the same permissive seal rule. Minn. R. 1800.4300: each person “may, upon licensure or certification, also obtain a seal,” and a stamped seal “may be used on documents in addition to the signed and dated certification required under part 1800.4200.” The mandatory item is the certification. Minn. R. 1800.4200, subp. 1 makes the certification and signature mandatory on documents that require a signature, implementing Minn. Stat. § 326.12, subd. 3, which requires the signature to be accompanied by a certification, the license number and the date the signature was affixed.

What must appear on the seal

  • On the optional seal: your name
  • On the optional seal: the legend “licensed professional geologist”
  • In the mandatory certification block: the prescribed geologist certification sentence
  • In the block: your signature
  • In the block: your typed or printed name
  • In the block: the date
  • In the block: your license number

Minn. R. 1800.4300 prescribes the geologist legend as “licensed professional geologist,” and the statute at Minn. Stat. § 326.12, subd. 2 writes the geoscience legend more loosely as the appropriate licensed professional geoscientist legend as defined by the board, so the rule is the operative list. The certification sentence in Minn. R. 1800.4200, subp. 4 differs from the architecture and engineering version in its object: “I hereby certify that this plan, document, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Geologist under the laws of the state of Minnesota.” Plan, document or report, not plan, specification or report. The board also licenses professional soil scientists, whose sentence uses the same three nouns with their own title.

Size and shape

Not addressed. No dimension appears in Minn. Stat. § 326.12, subd. 2 or in Minn. R. 1800.4300, and the board publishes none. Checked both provisions in full and Minn. R. 1800.4200 in full. There is no legally required Minnesota geologist seal size or shape, because there is no legally required seal.

Embosser, rubber stamp or digital

For the optional seal, a regular seal with a rubber stamp facsimile permitted on tracings or on papers that a regular seal would damage. For the mandatory certification, Minn. R. 1800.4200, subp. 1 allows electronic, facsimile or digital form, and Minn. Stat. § 326.12, subd. 3 gives a stamp or printed signature the force of an actual signature if it accurately depicts one. The right purchase for a geologist is a certification block stamp sized for a report certification page.

Signing and dating

Signature, certification, license number and the date the signature was affixed go together. Minn. R. 1800.4200, subp. 4a names the certification page of each report as a document that must be signed and certified, and subpart 3 puts certification for bound reports on the title sheet, first sheets or certification page. Nothing requires signing across a seal. Once applied, the certification is permanent and “must not be removed at a later date for any reason.”

Plan, document, or report, and no seal required at all

Minnesota geologists sit under the same two rules as the state’s architects, engineers, surveyors, landscape architects, soil scientists and certified interior designers, and those rules make the round seal optional. Minn. R. 1800.4300 says a licensee may obtain one. There is no provision anywhere in chapter 1800 or in Minn. Stat. §§ 326.02 to 326.15 requiring a seal on a geology report, and consequently no prescribed diameter.

The compulsory item is the certification block, and the geologist version is not the engineer version with a title swap. Minn. R. 1800.4200, subp. 4 gives it as “I hereby certify that this plan, document, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Geologist under the laws of the state of Minnesota.” Plan, document or report. Architects and engineers certify a plan, specification or report; surveyors certify a survey, plan or report. Three different objects across one rule, and the only way to get yours right is to copy the geologist entry.

Watch the statutory wording too. Minn. Stat. § 326.12, subd. 2 refers to the appropriate licensed professional geoscientist legend as defined by the board rather than naming it, so the rule rather than the statute is where the exact legend lives.

Which documents must be sealed

Plans, documents and reports prepared under Minn. Stat. §§ 326.02 to 326.15 that require a signature, with the certification page of each report named expressly in Minn. R. 1800.4200, subp. 4a. The statutory carve-out excludes documents of an intraoffice or intracompany nature and drafts or work of a preliminary, schematic or design development nature as judged by the licensed individuals who would normally be responsible for preparing them, which covers the usual run of internal geologic memoranda and data compilations.

Electronic and digital seals

Minn. R. 1800.4200, subp. 1 permits the certification and signature to be “electronic, as defined by Minnesota Statutes, section 325L.02, paragraph (h); facsimile; or digital.” No certificate authority, cryptographic standard or tamper-evidence requirement is named anywhere in the chapter. The statutory limit is that a stamp, printed signature or electronically created signature carries the force of an actual signature only if it creates an accurate depiction of your actual signature.

Renewal, lapse and retirement

A seal may be used during the life of an unrevoked, unexpired and unsuspended license, and stamping after expiration, revocation or suspension is unlawful unless the license has been renewed or reissued. Renewal is biennial, the license number does not change and nothing requires the device to be surrendered or destroyed. A certification already applied to a report is permanent.

Firm requirements

Minnesota registers firms offering geoscience services along with the board’s other professions and issues a Firm Registration certificate, with professional firm status under Minn. Stat. ch. 319B available separately. No rule requires a firm registration number on a certified report, and the firm holds no seal; the certification is first person and names you.

What to check before you order

Order a certification block stamp, not a round seal. Give the supplier the geologist sentence from Minn. R. 1800.4200, subp. 4 verbatim and proofread the proof for the three nouns “this plan, document, or report,” because a template built for engineers will read “this plan, specification, or report” and that is the wrong sentence for you. Add ruled lines for Signature, Typed or Printed Name, Date and Lic. No., and size the block for the certification page of a bound report. If you also want the optional round seal, it carries your name and the legend “licensed professional geologist” and no number, at whatever size you like.

Browse geologist stamps and seals.

More on this topic

Frequently asked questions

Is a geologist seal required in Minnesota?

No. Minn. R. 1800.4300 makes it permissive, and there is no provision anywhere in chapter 1800 or in Minn. Stat. §§ 326.02 to 326.15 requiring a seal on a geology report. What is required is the signed and dated certification under Minn. R. 1800.4200, which is mandatory on documents that require a signature.

What exactly goes in the certification block?

The geologist sentence from Minn. R. 1800.4200, subp. 4, verbatim, plus your signature, your typed or printed name, the date and your license number. Minn. Stat. § 326.12, subd. 3 requires the signature to be accompanied by the certification, the license number and the date the signature was affixed, so all four items belong in the block.

Why does the wording matter so much?

Because a supplier’s template will almost certainly say “this plan, specification, or report.” That is the architecture and engineering sentence. Yours says “this plan, document, or report.” Proofread the three nouns on the proof before approving it.

What size is a Minnesota geologist seal?

No size is prescribed, because no seal is required. Neither Minn. Stat. § 326.12, subd. 2 nor Minn. R. 1800.4300 states a dimension and the board publishes none, so an optional seal can be whatever size reads well for you.

What goes on the optional seal?

Your name and the legend “licensed professional geologist,” which is the wording Minn. R. 1800.4300 prescribes. The statute at Minn. Stat. § 326.12, subd. 2 writes the geoscience legend more loosely as the appropriate licensed professional geoscientist legend as defined by the board, so the rule is the operative list. The number does not go on the seal; it goes in the certification block.

Can the certification be applied electronically?

Yes. Minn. R. 1800.4200, subp. 1 permits the certification and signature to be “electronic, as defined by Minnesota Statutes, section 325L.02, paragraph (h); facsimile; or digital,” and no certificate authority, cryptographic standard or tamper-evidence requirement is named anywhere in the chapter. The statutory limit is that a stamp, printed signature or electronically created signature carries the force of an actual signature only if it creates an accurate depiction of your actual signature.

Where does the certification go on a bound report?

On the certification page. Minn. R. 1800.4200, subp. 4a names the certification page of each report expressly, and subpart 3 puts certification for bound reports on the title sheet, first sheets or certification page. Nothing requires signing across a seal.

Which documents need the certification?

Plans, documents and reports prepared under Minn. Stat. §§ 326.02 to 326.15 that require a signature. The statutory carve-out excludes documents of an intraoffice or intracompany nature and drafts or work of a preliminary, schematic or design development nature as judged by the licensed individuals who would normally be responsible for preparing them, which covers the usual run of internal geologic memoranda and data compilations.

Can I remove a certification later?

No. Minn. R. 1800.4200, subp. 5 makes an applied certification permanent: it “must not be removed at a later date for any reason.” That is worth knowing before certifying a report you expect to revise.

Does my Minnesota license number change at renewal?

No. Renewal is biennial, the license number does not change and nothing requires the optional device to be surrendered or destroyed. A seal may be used during the life of an unrevoked, unexpired and unsuspended license, and stamping after expiration, revocation or suspension is unlawful unless the license has been renewed or reissued.

Does a Minnesota geoscience firm need a registration?

Minnesota registers firms offering geoscience services along with the board’s other professions and issues a Firm Registration certificate, with professional firm status under Minn. Stat. ch. 319B available separately. No rule requires a firm registration number on a certified report, and the firm holds no seal, because the certification is first person and names you.

Acorn Sales Advantages

Made in USAMade in USA
6 Month Stamp Warranty6 Month Stamp Warranty
Free Electronic SealsFree Electronic Seals
FAST 1 Day TurnaroundFAST 1 Day Turnaround
State Board GuaranteeState Board Guarantee
Safe and Secure ShoppingSafe and Secure Shopping