Nevada interior designer stamp on notebook with autumn leaves and acorns, highlighting certification and compliance for professional registration.

Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Nevada State Board of Architecture, Interior Design and Residential Design and Nev. Rev. Stat. § 623.185(1), (2), (4) on 21 September 2026 · Updated 21 September 2026

Your seal is an equilateral triangle with each side measuring 2-1/2 inches, not a circle. NAC 623.755 requires a registered interior designer to obtain and possess a seal in that form, conforming to the design shown in the regulation. Read the regulation rather than the statute on this point: NRS 623.185(1) writes architects, registered interior designers and residential designers into one sentence with one element list, which invites the assumption that one design serves all three. NAC 623.750 gives the architect approximately 1-7/8 inches of circle, NAC 623.760 gives the residential designer the same, and NAC 623.755 gives you the triangle. The shape is the credential.

Three items go on the face, under NRS 623.185(1): your name as registered, the number of your certificate of registration, and the legend “Registered Interior Designer” exactly, not Certified and not Licensed. NRS 623.185(2) then requires a plan, specification, report or other document issued for official use to be “signed, sealed and dated.”

One Nevada duty sits on the paper rather than in the die, and no other credential in the state carries it. NRS 623.185(4) requires any plan, drawing, specification or other document you prepare to “contain a statement that the plan, study, drawing, specification or other document was prepared by a registered interior designer registered pursuant to the provisions of this chapter.” A sheet with the triangle but without that statement is incomplete.

Nevada interior designer seal requirements at a glance

Requirement Nevada rule Source
Seal required Yes Nev. Rev. Stat. § 623.185(1), (2), (4)
Required elements An equilateral triangle, Your name as registered, The number of your certificate of registration and The legend Registered Interior Designer Nev. Rev. Stat. § 623.185(1)
Size and shape An equilateral triangle, each side 2-1/2 inches. Nev. Admin. Code § 623.755
Device allowed NAC 623.755 requires the registrant to “obtain and possess an embossed seal, a seal designed as a rubber stamp or a seal in electronic format”, so all three are lawful in the triangular form. Nev. Admin. Code §§ 623.755, 623.763
Signature and date NRS 623.185(2) requires the document to be signed, sealed and dated. Nev. Rev. Stat. § 623.185(2), (4)
What must be sealed Any plan, specification, report or other document issued for official use, sealed before submission to a public authority under NAC 623.763(4). Nev. Rev. Stat. § 623.185(4)
Electronic seal NAC 623.755 authorizes a seal in electronic format alongside the embossed seal and the rubber stamp, and NAC 623.766 contemplates an original or electronic seal and signature. Nev. Admin. Code §§ 623.755, 623.763, 623.766
Renewal and lapse NRS 623.185(3) makes it “unlawful for a person to stamp or seal any plan, specification, report or other document with the seal after the certificate of registration of the architect, registered interior designer or residential designer, named therein, has expired or has been suspended or revoked, unless the certificate has been renewed or reissued.” The bar reaches any person, not only the registrant. Nev. Rev. Stat. § 623.185(3)
Firm requirements No firm seal and no firm number on the sheet. Nev. Rev. Stat. § 623.349
Regulator The Nevada State Board of Architecture, Interior Design and Residential Design Nev. Rev. Stat. ch. 623 (Architects, Interior Designers and Residential Designers), chiefly §§ 623.050, 623.185 and 623.349, and Nev. Admin. Code ch. 623, chiefly §§ 623.750, 623.755, 623.760, 623.763 and 623.766, read from the Nevada Legislature published text. NRS 623.185 states a single element list for architects, registered interior designers and residential designers, but NAC 623 prescribes different devices: approximately 1-7/8 inch circles for architects and residential designers, and an equilateral triangle with 2-1/2 inch sides for registered interior designers, who alone must also add the statement required by NRS 623.185(4). Nevada landscape architects are registered by the separate State Board of Landscape Architecture under NRS ch. 623A, and engineers and land surveyors by the State Board of Professional Engineers and Land Surveyors under NRS ch. 625. Nevada does not license geologists.

Is a seal required in Nevada?

Nevada is one of the few states that registers interior designers and gives them a genuine sealing duty. NRS 623.185(1) provides that “Upon being issued a certificate of registration, each registered architect, registered interior designer or residential designer shall obtain a seal of the design authorized by the Board, bearing the architect’s, registered interior designer’s or residential designer’s name, the number of the certificate of registration, and the legend ‘Registered Architect,’ ‘Registered Interior Designer’ or ‘Residential Designer.’” NRS 623.185(2) requires that a plan, specification, report or other document issued for official use be “signed, sealed and dated”. NAC 623.755 prescribes the device, and it is not a circle.

What must appear on the seal

  • An equilateral triangle
  • Your name as registered
  • The number of your certificate of registration
  • The legend Registered Interior Designer

Nothing is optional, and one extra obligation lives on the document rather than on the die. NRS 623.185(4) provides that “Any plan, drawing, specification or other document prepared by a registered interior designer must contain a statement that the plan, study, drawing, specification or other document was prepared by a registered interior designer registered pursuant to the provisions of this chapter.” That statement is additional to the seal, the signature and the date, and no other Nevada design credential carries it. On the device itself the legend is “Registered Interior Designer” exactly, not Certified Interior Designer and not Licensed Interior Designer, and the number is the certificate of registration number.

Size and shape

An equilateral triangle, each side 2-1/2 inches. NAC 623.755 requires the registered interior designer to obtain and possess a seal in the form of an equilateral triangle with each side measuring 2-1/2 inches, conforming to the design shown in the regulation. That is the single most unusual design-profession seal geometry in this group of states, and it is not a variant of the architect circle. The design is reproduced as an image in the regulation rather than described in words, so copy the layout from the published design.

Embosser, rubber stamp or digital

NAC 623.755 requires the registrant to “obtain and possess an embossed seal, a seal designed as a rubber stamp or a seal in electronic format”, so all three are lawful in the triangular form. The rubber stamp is the safe buy, because NAC 623.763 requires the seal, signature and date to produce a clearly visible and legible image on any copy or reproduction, and because a triangular embosser is an awkward device to read at reduction. The electronic format is expressly available for electronic submittals.

Signing and dating

NRS 623.185(2) requires the document to be signed, sealed and dated. NAC 623.763 requires the seal, signature and date to produce a clearly visible and legible image on any copy or reproduction, and NAC 623.763(4) requires plans to be stamped before they are submitted to any public authority. The same section makes a registrant who signs a document containing the work of others responsible for the whole of it. Remember the additional statement required by NRS 623.185(4), which identifies the preparer as a registered interior designer registered under chapter 623 and sits on the document alongside the signature, seal and date.

The Nevada interior designer seal is a triangle, and the circle you were quoted is an architect seal

NAC 623.755 is the reason to read the Nevada regulation rather than the statute. NRS 623.185(1) writes architects, registered interior designers and residential designers into one sentence with one element list, which invites the assumption that one design serves all three with the legend swapped. The regulation says otherwise.

NAC 623.750 gives the architect a seal of approximately 1-7/8 inches overall diameter. NAC 623.760 gives the residential designer the same approximate diameter. NAC 623.755 gives the registered interior designer an equilateral triangle, each side 2-1/2 inches. The shape is the credential. A supplier who quotes a 1-7/8 inch circle with REGISTERED INTERIOR DESIGNER in the ring has quoted an architect seal with the wrong words in it.

The second Nevada feature sits on the paper rather than in the die. NRS 623.185(4) requires any plan, drawing, specification or other document prepared by a registered interior designer to contain a statement that it was prepared by a registered interior designer registered under chapter 623. Architects and residential designers carry no equivalent duty, and a sheet that has the triangle but not the statement is incomplete.

One last point for anyone comparing states. Nevada, Missouri and Tennessee all have interior design credentials and they behave completely differently: Nevada prescribes a triangle and requires sealing, Missouri imposes a statutory seal duty with no design prescribed yet, and Tennessee protects the title and grants no seal at all.

Which documents must be sealed

Any plan, specification, report or other document issued for official use, sealed before submission to a public authority under NAC 623.763(4). NAC 623.763(5) excuses three categories: an as-built plan, record plan or bid document; a report including observations on construction progress; and an estimate of project costs. NAC 623.766(1) requires the sheet itself to carry the name, address and telephone number of the person or firm submitting the document, the project name and location, the date issued, and an indication of whether the document is preliminary or final. NRS 623.185(4) adds the registered interior designer statement to every plan, drawing, specification or other document the registrant prepares.

Electronic and digital seals

NAC 623.755 authorizes a seal in electronic format alongside the embossed seal and the rubber stamp, and NAC 623.766 contemplates an original or electronic seal and signature. No certificate authority, file format or cryptographic standard is named; the test is the visibility and legibility of the image under NAC 623.763. That is a lighter standard than the secure encryption requirement the engineering and surveying board imposes under NAC 625.610(10).

Renewal, lapse and retirement

NRS 623.185(3) makes it “unlawful for a person to stamp or seal any plan, specification, report or other document with the seal after the certificate of registration of the architect, registered interior designer or residential designer, named therein, has expired or has been suspended or revoked, unless the certificate has been renewed or reissued.” The bar reaches any person, not only the registrant. Nothing in NRS 623 or NAC 623 requires the seal to be surrendered or destroyed, and nothing says the certificate number changes on renewal or reinstatement. Since NAC 623.755 puts no expiration date on the face, a renewal does not obsolete the triangle.

Firm requirements

No firm seal and no firm number on the sheet. NRS 623.349 governs practice by a partnership, corporation, limited-liability company or other form of business organization or association and requires the organization to demonstrate to the Board that it is in compliance with that section. Neither NRS 623 nor NAC 623 creates a firm seal or a firm number for a document. NAC 623.766(1) requires the name, address and telephone number of the person or firm submitting the document, which is identification rather than a credential.

What to check before you order

Order an equilateral triangle with each side measuring 2-1/2 inches, laid out to the design printed in NAC 623.755. Do not accept a circular die. Three items go on it: your name as registered, your certificate of registration number, and the legend Registered Interior Designer. Embossed, rubber stamp and electronic formats are all lawful, and the rubber stamp is the practical choice because the image has to stay clearly visible and legible on any copy. Remember that the triangle alone does not finish the sheet: NRS 623.185(4) also requires a statement that the document was prepared by a registered interior designer registered under chapter 623.

Browse interior designer stamps and seals.

More on this topic

Frequently asked questions

Is a seal required for a registered interior designer in Nevada?

Yes. NRS 623.185(1) provides that on being issued a certificate of registration, each registered architect, registered interior designer or residential designer “shall obtain a seal of the design authorized by the Board.” NRS 623.185(2) then requires documents issued for official use to be signed, sealed and dated, and NAC 623.763(4) requires plans to be stamped before they are submitted to any public authority.

What shape is the Nevada interior designer seal?

An equilateral triangle, each side 2-1/2 inches, under NAC 623.755. It is the most unusual design-profession seal geometry in the country and it is not a variant of the architect circle. If a supplier quotes you a 1-7/8 inch circle with REGISTERED INTERIOR DESIGNER in the ring, they have quoted an architect seal with the wrong words in it. The design is reproduced as an image in the regulation rather than described in words, so copy the layout from the published design.

What has to appear on a Nevada interior designer seal?

Three elements under NRS 623.185(1): your name as registered, the number of your certificate of registration, and the legend Registered Interior Designer. The legend is exact. Certified Interior Designer and Licensed Interior Designer are the titles other states use and neither belongs on a Nevada die.

Embossed, rubber stamp or electronic in Nevada?

All three are lawful in the triangular form. NAC 623.755 requires you to “obtain and possess an embossed seal, a seal designed as a rubber stamp or a seal in electronic format.” The rubber stamp is the practical choice, because NAC 623.763 requires the seal, signature and date to produce a clearly visible and legible image on any copy or reproduction, and a triangular embosser is awkward to read at reduction.

What is the extra statement Nevada requires on my documents?

NRS 623.185(4) requires any plan, drawing, specification or other document prepared by a registered interior designer to carry a statement that it was prepared by a registered interior designer registered under chapter 623. It is additional to the seal, the signature and the date, and architects and residential designers carry no equivalent duty. Set it as a line of text on the sheet rather than trying to fit it inside the triangle.

Which Nevada documents need the seal?

Any plan, specification, report or other document issued for official use, sealed before submission to a public authority under NAC 623.763(4). NAC 623.763(5) excuses three categories: an as-built plan, record plan or bid document; a report including observations on construction progress; and an estimate of project costs. NAC 623.766(1) separately requires the sheet to carry the name, address and telephone number of the person or firm submitting it, the project name and location, the date issued, and whether the document is preliminary or final.

Does my signature have to cross the Nevada seal?

The regulation does not require it. NRS 623.185(2) asks for signed, sealed and dated, and NAC 623.763 sets the test as a clearly visible and legible image on any copy or reproduction. The same section makes a registrant who signs a document containing the work of others responsible for the whole of it, which is worth knowing before you sign a compiled set.

Can I seal Nevada interior design documents electronically?

Yes, and the standard is light. NAC 623.755 authorizes a seal in electronic format alongside the embossed seal and the rubber stamp, and NAC 623.766 contemplates an original or electronic seal and signature. No certificate authority, file format or cryptographic standard is named; the test is the visibility and legibility of the image under NAC 623.763. That is lighter than the secure encryption requirement the engineering and surveying board imposes under NAC 625.610(10).

What happens to my Nevada seal if the certificate expires?

It stops being usable by anyone. NRS 623.185(3) makes it “unlawful for a person to stamp or seal any plan, specification, report or other document with the seal after the certificate of registration of the architect, registered interior designer or residential designer, named therein, has expired or has been suspended or revoked, unless the certificate has been renewed or reissued.” The bar reaches any person, not only you. Nothing requires the seal to be surrendered or destroyed, and since NAC 623.755 puts no expiration date on the face, a renewal does not obsolete the triangle.

Does my firm get a seal or a number on the sheet in Nevada?

No. NRS 623.349 governs practice by a partnership, corporation, limited-liability company or other business form and requires the organization to demonstrate compliance to the Board, but neither NRS 623 nor NAC 623 creates a firm seal or a firm number for a document. NAC 623.766(1) asks for the name, address and telephone number of the person or firm submitting the document, which is identification rather than a credential.

How does Nevada compare with other states that credential interior designers?

They behave quite differently. Nevada prescribes the triangle and requires sealing. Missouri imposes a statutory seal duty with no design prescribed yet. Tennessee protects the title registered interior designer and grants no seal at all. So a device or a habit carried in from another state is worth rechecking against NAC 623.755 rather than assumed.

Acorn Sales Advantages

Made in USAMade in USA
6 Month Stamp Warranty6 Month Stamp Warranty
Free Electronic SealsFree Electronic Seals
FAST 1 Day TurnaroundFAST 1 Day Turnaround
State Board GuaranteeState Board Guarantee
Safe and Secure ShoppingSafe and Secure Shopping