Written by Acorn Sales Company, manufacturing stamps and seals since 1964 · Reviewed by Holly R, VP of Sales and Marketing at Acorn Sales, against the Georgia State Board of Registration for Professional Geologists and Ga. Comp. R. & Regs. r. 265-4-.07, 265-5-.02 on 21 September 2026 · Updated 21 September 2026
Georgia prescribes the geologist seal by pointing at a printed sample rather than by stating a dimension. Rule 265-4-.07 provides that “Each registrant hereunder, upon issuance of a certificate may purchase a seal bearing the registrant’s name and the legend ‘Registered Professional Geologist’. The seal shall comply in all respects with the sample, including size and format.” The sample is printed in the rule as an image, so ask the Georgia State Board of Registration for Professional Geologists for that artwork before you order anything.
The content list is short and it is missing the item most people expect. The rule names two things: your name and the legend Registered Professional Geologist. It does not list the registration number. Compare the Georgia engineer and land surveyor seal, where the Board’s own Seals and Stamps sheet insists on the complete license number with its prefix. Do not let a supplier add a number to a Georgia geologist seal on the assumption that every professional seal carries one; check the sample.
Use is triggered by public geologic work. Rule 265-5-.02 requires all drawings, reports, plats or other geologic papers or documents involving public geologic work, prepared or approved by a registered geologist or by a subordinate employee under the registrant’s direction, for the use of or delivery to any person or for public record within the state, to be signed by the registrant and impressed with the seal.
Georgia geologist seal requirements at a glance
| Requirement | Georgia rule | Source |
|---|---|---|
| Seal required | Yes | Ga. Comp. R. & Regs. r. 265-4-.07, 265-5-.02 |
| Required elements | Your name, Registered Professional Geologist and The Board sample design, including its size and format | Ga. Comp. R. & Regs. r. 265-4-.07 |
| Size and shape | Fixed by the sample rather than by a number. | Ga. Comp. R. & Regs. r. 265-4-.07 |
| Device allowed | An impression device is what the duty rule describes. | Ga. Comp. R. & Regs. r. 265-4-.07, 265-5-.02 |
| Signature and date | Signature and seal, no date rule. | Ga. Comp. R. & Regs. r. 265-5-.02 (silent as to date and placement) |
| What must be sealed | All drawings, reports, plats or other geologic papers or documents involving public geologic work as defined in the Act, prepared or approved by a registered geologist or a subordinate employee under the registrant’s direction, for the use of or for delivery to any person or for public record within this State. | Ga. Comp. R. & Regs. r. 265-5-.01, 265-5-.02 |
| Electronic seal | Not addressed. There is no electronic seal or digital signature rule in chapter 265, and no stripping requirement of the kind the Georgia engineering and land surveying board carries at rule 180-12-.02(8) and (9). The. | Ga. Comp. R. & Regs. ch. 265 (silent) |
| Renewal and lapse | Rule 265-4-.07 ties the purchase of the seal to issuance of a certificate. | Ga. Comp. R. & Regs. chs. 265-4, 265-7 |
| Firm requirements | Not applicable as a firm seal. | Ga. Comp. R. & Regs. r. 265-4-.07, 265-5-.01 |
| Regulator | The Georgia State Board of Registration for Professional Geologists | Ga. Comp. R. & Regs. ch. 265, Georgia State Board of Registration for Professional Geologists, principally rules 265-4-.07 and 265-5-.02, with chapters 265-1 through 265-9 read for scope, from the Georgia Secretary of State rules portal |
Is a seal required in Georgia?
Georgia still registers professional geologists and the Board appears on the Secretary of State’s current list of licensing boards. Rule 265-4-.07 creates the device: “Each registrant hereunder, upon issuance of a certificate may purchase a seal bearing the registrant’s name and the legend ‘Registered Professional Geologist’. The seal shall comply in all respects with the sample, including size and format.” Rule 265-5-.02 supplies the duty, requiring all drawings, reports, plats or other geologic papers or documents involving public geologic work prepared or approved by a registered geologist, or by a subordinate employee under the registrant’s direction, for the use of or for delivery to any person or for public record within the state, to be signed by the registrant and impressed with the seal.
What must appear on the seal
- Your name
- Registered Professional Geologist
- The Board sample design, including its size and format
Nothing is a choice. Rule 265-4-.07 names two content items, the registrant’s name and the legend Registered Professional Geologist, and then subordinates everything else to the printed sample: the seal “shall comply in all respects with the sample, including size and format.” Note that the registration number is not a listed content item, which is different from most professional seals and different from the Georgia engineer and land surveyor seal, where the Board’s Seals and Stamps sheet insists on the complete license number with its prefix.
Size and shape
Fixed by the sample rather than by a number. Rule 265-4-.07 requires the seal to comply in all respects with the sample, including size and format, and prints the sample image rather than stating a dimension in words. The sources here are chapter 265-4 and chapter 265-5 in full. There is therefore no figure a supplier can work to without the Board’s artwork, and no Georgia house dimension to fall back on: architects are 1 3/4 inches round, registered interior designers 1 3/4 inches square, engineers and land surveyors a 1 1/2 inch outer circle with a 1 inch inner circle, and none of those governs here.
Embosser, rubber stamp or digital
An impression device is what the duty rule describes. Rule 265-5-.02 requires the covered documents to be “signed by him and impressed with said seal,” and rule 265-4-.07 speaks of purchasing a seal that complies with the sample. Neither rule names a rubber stamp, an embosser or an electronic seal by name. An inked stamp that reproduces the sample is the practical buy, because Georgia geologic reports and plats are copied and filed.
Signing and dating
Signature and seal, no date rule. Rule 265-5-.02 requires the document to be signed by the registrant and impressed with the seal, “either of which shall indicate his responsibility for them.” Nothing requires the signature to cross the impression, nothing specifies ink color, and nothing requires a date beside the seal. The sources here are chapters 265-4 and 265-5 in full. This is a much lighter signature rule than Georgia applies to registered interior designers, who must sign permit documents in permanent blue ink with an issue date and purpose.
The rule points at a printed sample, and your number is not on it
Rule 265-4-.07 does something few seal rules do: it declines to state a dimension and instead requires the device to “comply in all respects with the sample, including size and format.” The sample is printed in the rule as an image. That means a Georgia geologist cannot hand a supplier a written specification and cannot rely on any Georgia house size, because the state’s three other design seal rules give three different geometries and none of them governs geology.
Which documents must be sealed
All drawings, reports, plats or other geologic papers or documents involving public geologic work as defined in the Act, prepared or approved by a registered geologist or a subordinate employee under the registrant’s direction, for the use of or for delivery to any person or for public record within this State. The trigger is public geologic work, so the definition of that term carries real weight and is set by the Act rather than by chapter 265-5. The same rule extends the seal requirement to a nonresident practicing under the provisions of the Act. Rule 265-5-.01 governs the business structures through which geology may be practiced and the employment of nonregistered geologists for nonpublic work.
Electronic and digital seals
Not addressed. There is no electronic seal or digital signature rule in chapter 265, and no stripping requirement of the kind the Georgia engineering and land surveying board carries at rule 180-12-.02(8) and (9). The sources here are chapters 265-4 and 265-5 and the chapter list for department 265, which covers administration, purpose, definitions, registration, practice after registration, geologist in training (repealed), fees and costs, standards of conduct and procedural rules. The duty rule speaks of a document impressed with the seal, which points to a physical impression.
Renewal, lapse and retirement
Rule 265-4-.07 ties the purchase of the seal to issuance of a certificate. Renewal, fees and costs sit in chapter 265-7 and standards of conduct in chapter 265-8. Whether the registration number changes on reinstatement is not addressed, and neither is any duty to destroy or surrender the seal, which we confirmed by reading chapters 265-4 and 265-5 in full. Because the number is not even a listed element of the face, renewal has no effect on the device.
Firm requirements
Not applicable as a firm seal. Rule 265-5-.01 addresses the business structures through which geology may be practiced and the employment of nonregistered geologists for nonpublic work, but chapter 265 prescribes no geology firm seal and no firm certificate number for the face. The seal under rule 265-4-.07 carries the registrant’s name and the legend only.
What to check before you order
Ask the Board for the printed sample before you order, because rule 265-4-.07 requires your seal to comply in all respects with that sample including its size and format, and states no dimension in words. The face carries your name and the legend Registered Professional Geologist. The rule does not list your registration number as a content item, so do not let a supplier add one unless the sample shows it. An inked device that reproduces cleanly is the practical choice, since rule 265-5-.02 has the covered documents impressed with the seal and signed, and those documents go to clients and into the public record. Georgia has three other design seal specifications and none of them applies to you, so do not order by analogy.
Browse geologist stamps and seals.
Frequently asked questions
Is a geologist seal required in Georgia?
Yes, on public geologic work. Rule 265-4-.07 lets a registrant purchase the seal on issuance of a certificate, and rule 265-5-.02 requires the covered documents to be signed by the registrant and impressed with the seal, “either of which shall indicate his responsibility for them.” The same rule extends the requirement to a nonresident practicing under the provisions of the Act.
What size is a Georgia geologist seal?
The rule states no figure. It requires the seal to comply in all respects with the sample, including size and format, and prints the sample rather than describing it in words. There is no Georgia house dimension to fall back on either: architects are 1 3/4 inches round, registered interior designers 1 3/4 inches square, and engineers and land surveyors a 1 1/2 inch outer circle with a 1 inch inner circle. None of those governs geology.
Does my registration number go on the seal?
The rule does not list it. Rule 265-4-.07 names the registrant’s name and the legend Registered Professional Geologist as the content, and subordinates everything else to the sample. That is different from most professional seals, so the sample is the thing to check before ordering rather than an assumption about what seals normally carry.
Rubber stamp or embosser in Georgia?
The rules describe an impression without naming a device. Rule 265-5-.02 requires the covered documents to be “signed by him and impressed with said seal,” and rule 265-4-.07 speaks of purchasing a seal that complies with the sample. Neither names a rubber stamp, an embosser or an electronic seal. An inked stamp that reproduces the sample is the practical buy, because Georgia geologic reports and plats get copied and filed.
Does Georgia allow a digital geologist seal?
Chapter 265 has no electronic seal or digital signature rule, and no stripping requirement like the one the Georgia engineering and land surveying board carries at rule 180-12-.02(8) and (9). The duty rule speaks of a document impressed with the seal, which points to a physical impression. Treat a claimed Georgia geologist digital sealing standard as unverified until the Board supplies one.
Do I have to date a Georgia geologist seal?
No date rule exists. Rule 265-5-.02 requires the document to be signed and impressed with the seal and stops there: nothing requires the signature to cross the impression, nothing specifies ink color and nothing requires a date beside the seal. That is a much lighter signature rule than Georgia applies to registered interior designers, who must sign permit documents in permanent blue ink with an issue date and purpose.
Which documents have to be sealed?
All drawings, reports, plats or other geologic papers or documents involving public geologic work as defined in the Act, prepared or approved by a registered geologist or a subordinate employee under the registrant’s direction, for the use of or delivery to any person or for public record within the state. The trigger is public geologic work, so that definition, which sits in the Act rather than in chapter 265-5, carries real weight.
Is the Georgia geologist board still active?
Yes. The Board appears on the Secretary of State’s current list of licensing boards administered by the Professional Licensing Boards Division, and its own page shows current application, renewal and licensee search services. Georgia geologists are their own board, separate from architects and interior designers at chapter 50 and from engineers and land surveyors at chapter 180.
Does a Georgia geology firm need a seal?
No. Rule 265-5-.01 addresses the business structures through which geology may be practiced and the employment of nonregistered geologists for nonpublic work, but chapter 265 prescribes no geology firm seal and no firm certificate number for the face. The seal under rule 265-4-.07 carries your name and the legend only.
Does renewal affect my Georgia seal?
Not on its face. Rule 265-4-.07 ties the purchase of the seal to issuance of a certificate, and renewal, fees and costs sit in chapter 265-7 with standards of conduct in chapter 265-8. Whether the registration number changes on reinstatement is not stated, and neither is any duty to destroy or surrender the seal. Because the number is not even a listed element of the face, renewal has no effect on the device.































