Acorn Sales Blog

North Carolina Landscape Architect Seal: Rules and Files
Send a CAD file and the computer generated seal has to come off it, replaced by a legend naming the sealer, the license number and the date. The signature goes across the face of the seal, and digitally signed files are exempt.

New York Landscape Architect Seal: Bands and Warning Stamp
New York landscape architects follow the architect rule, not the engineer rule: Registered Landscape Architect at the top of the outer band, State of New York at the bottom. Why an engineer template produces reversed bands, and the companion warning stamp the rule requires.

New Jersey Landscape Architect Seal: Which Rules Apply
New Jersey's ban on rubber stamp seals does not reach landscape architects: it belongs to the engineers and land surveyors board, whose licensees you are not. Licensing runs through the State Board of Architects instead, and this sets out which rules follow from that.

New Hampshire Landscape Architect Seal: Twelve Leaves
Twelve leaves encircle a New Hampshire landscape architect seal, bringing its outside diameter to 1 7/8 inches, a figure no other state design credential shares. The two circle diameters inside them, and when the seal is optional on plans rather than mandatory.

Nevada Landscape Architect Stamp: The Board Issues It
There is nothing to order: the Nevada Board issues the landscape architect stamp itself once your certificate is issued and the fee is paid, and any other stamp is prohibited. How to request the electronic version, and what the rule says the seal carries.

Nebraska Landscape Architect Stamps: What You Can Order
Landscape architects are not licensed, registered or certified in Nebraska, so no seal is prescribed and no board approves one. The three acts that do cover design work, why none reaches landscape architecture, and what you can put on a stamp instead.

Montana Landscape Architect Seal: Rules and Placement
The Montana landscape architect seal goes on every drawing and on the title pages of specifications, sheet by sheet for the drawings. The board-approved legend Licensed Landscape Architect, State of Montana, and why this seal cannot substitute for an architect or an engineer one.

Missouri Landscape Architect Seal: Size and PLA Prefix
Missouri prefixes a landscape architect license number with PLA, not PL, and the lower arc reads PROFESSIONAL LANDSCAPE ARCHITECT rather than Registered. The fixed 1-3/4 inch circle with no tolerance, and the fitting problem the longest legend in the state creates.

Mississippi Landscape Architect Seal: Size and Rules
A Mississippi landscape architect seal is circular and two inches, and the same Board sets the architect seal at one and a half. Why a firm ordering both gets one wrong, and why the signature and date go across the face of the seal.

Minnesota Landscape Architect Seal: Optional, Block Required
There is no required Minnesota landscape architect seal, so there is no diameter to get right and exactly one sentence to get exactly right. The prescribed certification wording, where your license number goes, and which documents the certification and signature are mandatory on.

Michigan Landscape Architect Seal: Rules and the Imprint
An imprint of a Michigan landscape architect seal has to reach the state within 30 days of licensure, and again within 30 days of any replacement. Why no other Michigan design profession carries this duty, and what it means for the device you buy.

Massachusetts Landscape Architect Stamp and Seal Supplies
Four basic requirements govern a Massachusetts landscape architect seal, and everything else about the purchase follows from them. What the state wants on the impression, how to reach the board, and which rubber stamps and embossing seals meet the regulations.






