Acorn Sales Blog

Maryland Landscape Architect Seal: Two Devices, Two Jobs
In Maryland the rubber stamp is an addition to the landscape architect impression seal, not a replacement for it, and the regulation says so expressly. What each device is for, and why the face carries only your name and license number.

Maine Landscape Architect Seal: What the Rules Say
Maine publishes no landscape architect seal design at all: no legend, no element list, no layout and no diameter in either statute or board rule. Why the one statutory sentence covers architects and landscape architects together, and what to ask the board before ordering.

Louisiana Landscape Architect Seal: Size and Placement
You sign your legal name first, then place the Louisiana landscape architect seal over that signature, which is the opposite of the adjacent placement most states allow. The 1 5/8 inch size, and why the licensing body here is the Horticulture Commission.

Kentucky Landscape Architect Wet Stamps and Embossing Seals
Verifying plans and specifications is part of a Kentucky landscape architect job, and a rubber stamp or embossing seal is how it gets done. The Kentucky regulations on size and required wording, how to reach the state board, and which products fit the rules.

Kansas Landscape Architect Stamp and Seal Supplies
Embossing seals raise the design on plans, while rubber stamps put your name, license number and state on everything you prepare or supervise. The Kansas rules on size and design, how to reach the state board, and ten products that meet them.

Iowa Landscape Architect Seal: Size and Information Block
An Iowa landscape architect seal reads Professional Landscape Architect, State of Iowa, with your name and license number, on an outside circle of about 1 3/4 inches. Why three Iowa boards share one diameter and differ only in the legend.

Illinois Landscape Architect Seal: Wording and Rules
Landscape architecture is the one Illinois design profession whose rule requires no license expiration date beside the seal, so no date block goes stale each cycle. The required wording, what the registration rule says instead, and which documents need sealing.

Idaho Landscape Architect Seal: Rules and Wording
Idaho requires a written signature and the date beside the seal every single time it is applied, and skipping either is not an option. The board approved wording, what the seal may be, which documents need sealing, and how electronic seals fit.

Hawaii Landscape Architect Seal: Size and Wording
Four words sit in the middle of a Hawaii landscape architect seal: Licensed Professional Landscape Architect, the longest of the state's four legends, inside a 1-1/8 inch circle. Why you should proof it before the die is cut, and what the date line means.

Florida Landscape Architect Seal: Wording and Rules
A Florida landscape architect seal reads LANDSCAPE ARCHITECT, two words, not the registered or licensed wording that Texas, Pennsylvania and California use. The four required contents, why no size is prescribed anywhere, and how one index sheet can carry a whole set.

Delaware Landscape Architect Seal: Size and Design
The outside circle on a Delaware landscape architect seal measures 1 13/16 inches across the center, a figure no other Delaware board uses. What the inner circle may carry, what the 2025 amendment changed, and which sheet of a bound set takes the seal.

Arizona Landscape Architect Seal: Size and Legend
The Arizona legend is four words, Registered Professional Landscape Architect, and a stock die cut for another state gets it wrong. The 1-1/2 inch circle it has to fit into, the inner circle dimension, and the imprint filed with the Board before first use.






