Acorn Sales Blog

Maryland Surveyor Seal: No Great Seal, No Number
The pictorial Great Seal of Maryland does not belong on a surveyor's device, and the statute does not ask for a license number either. What the statute does list, where the Great Seal requirement comes from, and what that leaves you free to choose.

Kentucky Surveyor Seal: 1-1/4 to 1-1/2 Inches
The Kentucky surveying seal runs 1-1/4 to 1-1/2 inches, a narrower range than the 1-3/8 to 1-5/8 inches set for engineering seals. Why a dual licensee ordering one size ends up out of range, which regulation is live, and which citations are repealed.

Alaska Land Surveyor Seal: Board Artwork, No Size
Alaska states no seal diameter anywhere: the rule prescribes the surveyor seal by reproducing a picture of it. The license number carries numeric characters only, the seal is dated each time you sign, and the firm number goes on every plat.

Colorado Surveyor Seal: 1-5/8 Inch, Sign Through It
Colorado requires the signature and date to appear through the seal, not beside it, which rules out an embosser on a reproducible plat. The 1-5/8 inch outer and 15/16 inch inner geometry, and why surveyors are the one Colorado profession ordered to seal.

New York Land Surveyor Seal: The Great Seal Inside
The Great Seal of New York goes at the center of a surveyor seal, with the license number below it and nothing else in that space. A generic round template is not a New York seal, and a separate alteration warning stamp is required.

Georgia Land Surveyor Seal: 1-1/2 Inch and LS Prefix
A Georgia surveyor seal is 1-1/2 inches outside with a 1 inch inner circle, and the license number carries its LS prefix. What stays off the die, how the Board wants your name written, and where a facsimile signature is lawful.

South Dakota Surveyor Seal: Land Surveyor, Not Pro
Land Surveyor, not Professional Land Surveyor: South Dakota's closed list of four titles leaves out the wording most surrounding states use. Licensed and Registered are the only permitted prefixes, and the inner circle is five eighths of the outer one.

Rhode Island Surveyor Seal: Square, and On Loan
Rhode Island land surveyors get a square seal, about one and a half inches, while the state's architects and landscape architects are round. The board also only loans you the right to buy the device, and takes it back on revocation or suspension.

Utah Surveyor Seal: 1-1/2 Inch Minimum, Sign Across
Utah sets a floor of one and one-half inches with no ceiling, and you sign and date across the face of every seal imprint. One rule covers engineers, structural engineers and land surveyors, with only the title changing and the intern seal ban explicit.

New Jersey Surveyor Seal: No Rubber Stamps Allowed
New Jersey does not permit a rubber stamp seal for land surveyors; the rule allows only a digital seal or an impression seal. A self-inking stamp sold for this purpose is the wrong product, and the working device is a metal embosser.

Wyoming Land Surveyor Seal: Exact 1-3/4 Inch Circles
Wyoming fixes the surveyor seal circles exactly, 1-3/4 inches outer and 1-1/4 inches inner, and these are exact values rather than minimums. The band wording, why the signature and date are superimposed over the seal, and why the architect size band is wrong here.

Nebraska Land Surveyor Seal: The Board Issues It
A Nebraska land surveyor does not buy a seal, because the examining board issues both a rubber stamp seal and a digital seal. There is no diameter to choose, no wording to specify, and this covers what to do if a device is lost.






