Acorn Sales Blog

Vermont Surveyor Seal: A Certification Goes With It
A Vermont seal never travels alone: the statute requires a seal, a signature and a certification statement as to the nature of the survey work. What that statement has to set out, the two trigger points, and why the lettering height rule says should.

Hawaii Land Surveyor Seal: 1-1/2 Inch and Land Court
The Hawaii land court will not accept a map or survey for filing without your seal, which is a hard stop rather than a preference. The stamp is two circles, 1-1/8 inches inside 1-1/2 inches, and the date beside it is your expiration date.

Alabama Land Surveyor Seal: 1 5/8 to 2 Inches
Every map, plat and chart sheet in an Alabama survey set gets sealed, signed and dated: there is no title sheet shortcut. The seal is 1 5/8 to 2 inches to a Board furnished design, and the bound volume concession covers reports, not drawings.

Proper Use of a Massachusetts Land Surveyor Stamp
Massachusetts requires a 1-1/2 inch surveyor stamp with a serrated edge rather than a smooth one, which is the main difference from other states' seals. What sits inside that edge, and how the stamp should be used in practice.

Louisiana Land Surveyor Seal: Two Permitted Sizes
Louisiana permits exactly two surveyor seal diameters, a 1 5/8 inch pocket seal and a 2 inch desk seal, rather than a range with a tolerance. What the face carries, what endorsement licensees add, and why a firm may not possess a seal.

New Mexico Surveyor Seal: Rubber Seals Are Allowed
In New Mexico the sentence that bans rubber stamps is about signatures, not seals: the very next subsection allows an impression seal, a rubber type or a computer generated facsimile. The three concentric circle diameters, and what goes in each ring.

Ohio Surveyor Seal: Registered Professional Surveyor
Ohio authorizes a surveyor seal design it has never published, so the rule specifies only two things: your name as registered and the legend Registered Professional Surveyor. Why the registration number is customary rather than required, and what follows when no diameter exists.

Minnesota Land Surveyor Seal: Optional, Block Required
No Minnesota rule requires a land surveyor to own or use a seal, so the purchase that matters is a certification block stamp. The mandatory block wording, how the surveyor version differs from the engineer version, and what counts as a document needing certification.

Indiana Surveyor Seal: 1-5/8 to 1-7/8 Inch, Date Beside
On an Indiana surveyor document the signature and the date the seal was affixed both go directly adjacent to the seal, never across it. The 1-5/8 to 1-7/8 inch range, and why that date is the date of sealing rather than a signing date.

Maine Land Surveyor Seal: Board Design, Signed Plans
No Maine rule states a surveyor seal dimension, legend or element list, so the artwork has to come from the board. Why officials may not accept unsealed plans, the notation required when altering another surveyor sealed plan, and what to ask the board first.

Delaware Surveyor Seal: Raised First, Rubber in Red
Delaware wants a raised surveyor seal wherever possible and allows a rubber seal only in red ink, so a black rubber stamp is not compliant. Why you will own both devices, and the specimen of each the Board wants within 30 days.

Pennsylvania Surveyor Seal: Design B at 1-3/4 Inch
Pennsylvania prints its seal designs rather than describing them, and a land surveyor takes Design B at exactly 1-3/4 inches. The pocket seal allowance at 1-1/2 inches, what the word identical rules out, and why the die comes from the printed figure.






