Acorn Sales Blog

Washington Land Surveyor Seal: No Size, Four Elements
Washington states no diameter for the surveyor seal, replacing the dimension with a standard: a size that assures full legibility after the document is reproduced. The four required elements, and why preliminary work gets stamped but not signed or dated.

Iowa Surveyor Seal: Certification Block, Contrast Ink
Iowa works by certification block, and the land surveying wording is not the engineering wording. What the surveyor block has to say, the removable clause for maps drawn from public records, and why the signature and date go in a contrasting ink color.

Texas Land Surveyor Seal: The Two Inch Maximum
Nearly every state sets a minimum seal size, but Texas surveying sets a maximum of two inches, so a 2-1/4 inch die fails even when it reads perfectly. The board-authorized designs, and why a licensed state land surveyor has to carry a second seal.

Kansas Land Surveyor Seal: Size, Wording and Rules
Kansas licenses a PROFESSIONAL SURVEYOR, two words with no LAND in the middle, and a stock die from a national catalog almost always carries the extra word. The fixed geometry of 1-5/8 inch outer and 1-1/16 inch inner circles, and what else belongs inside.

Virginia Land Surveyor Seal: Two Inches, Two Designs
Virginia surveyor seals are two inches in diameter, not the 1-5/8 inches common across the mid Atlantic, so a die that works in Maryland does not comply here. The two published designs, and why the land surveyor B is marked in the number.

Tennessee Surveyor Seal: Registered Land Surveyor
Tennessee land surveyors sit in a different statute chapter from architects and engineers, so the familiar architect seal rules do not follow them, diagrams and signature ban included. The Registered Land Surveyor legend, the board-set design, and which documents carry the seal.

NC Land Surveyor Seal: No Size, Firm Name Required
North Carolina states no diameter for a land surveyor seal, and the architecture board's 1 1/2 to 1 3/4 inch figure does not travel here. The firm name, address and number required on the first sheet, and why signature stamps are prohibited.

Montana Surveyor Seal: Board Design and Short Number
Montana publishes its surveyor seal content in a board FAQ, and the license number goes on in short form with a profession suffix such as 99999PLS. The four required elements, why no size is stated, and what a dual licensee has to decide.

Connecticut Surveyor Seal: Board Design, Two If Dual
A dual licensed Connecticut engineer and land surveyor needs two seals, not one, and the Board prescribes a size and design it does not publish. Where to get the specimen before anything is cut, and the accuracy statement that applies to surveyors alone.

Oklahoma Surveyor Seal: Two Named Commercial Sizes
Most states give a diameter or a range; Oklahoma names two off-the-shelf seal sizes, the 1 7/8 inch and the 1 5/8 inch, and lets you choose. The circle dimensions for each, the fixed text orientation, and where the firm number belongs.

Oregon Land Surveyor Seal: 2 Inches, No Resizing
Oregon requires a surveyor seal at least 2 inches point to point and then forbids reducing or enlarging it on a final document. Why shrinking the image to fit a crowded title block breaks the rule, and the registration date on the face.

New Hampshire Surveyor Seal: Square, With a Transit
New Hampshire land surveyors use a square seal with a transit in it, two squares at 1-9/16 and 1-1/2 inches, so a circular blank is the wrong object entirely. Where the name, number and legends sit, and the signature line built into the design.






