Acorn Sales Blog

Understanding and Using New Mexico Engineering Stamps and Seals
A New Mexico engineering seal is built from three circles, with the outermost 1-1/2 inches in diameter. What else the appearance rules require, which documents have to carry the seal, and how new licensees get compliant from the first submission.

Delaware PE Seal Rules: Design, Format and Filing
Delaware publishes no PE seal design and no diameter, and Title 24 of its administrative code has no engineers chapter to fall back on. The statute fixes three elements, your name as licensed, your license number and the legend professional engineer.

Missouri PE Seal Requirements: 1-3/4 Inch, PE Prefix
Missouri fixes the PE seal at one and three quarters inches exactly, with no range, no minimum and no tolerance. The license number is preceded by the capitals PE as part of the number, and the rest of the design is prescribed too.

The Ins and Outs of Using Tennessee Engineers Seals
Tennessee engineers, architects and landscape architects all work under the same sealing rules, and the state determines the official design. What has to appear on an engineering document, where the seal and embosser fit, and how the rules apply across the three professions.

Maine PE Seal Requirements: 1-3/4 Inch Size, Wording
Maine's 1-3/4 inch PE seal size comes from the board's Approved Seal Format page, not from the rule, which prescribes no dimension at all. The four categories Maine expressly exempts from sealing, and how one seal plus a sheet count covers a bound set.

Rhode Island PE Stamp: Square Format, Registered Wording
Rhode Island prescribes no engineer seal size at all, no diameter and no minimum text height, so an inch figure quoted as the requirement is a supplier's house standard. The four text elements the rule does fix, the square format, and the Registered legend.

Kansas Seal Rules: Size, Wording and the 30-Day Clock
One seal design covers five Kansas professions: outer circle 1 5/8 inches, inner circle 1 1/16 inches, with only the profession legend in the lower ring changing. The exact words the board uses for each, and the 30 day clock that starts at licensure.

Connecticut PE Seal Rules: Board Design and Two Seals
Connecticut publishes no seal dimension at all: the Board prescribes the size and design, and that prescription is not printed in the regulations. A rubber stamp must be identical to the specified seal, and holding two credentials means buying two devices.

Ordering the Right Puerto Rico Seal
An engineer's impression seal in Puerto Rico tells anyone reading the document that a licensed professional stands behind it. Who is required to hold one, when the law expects it to be used, and what to confirm before ordering.

Using the Oregon Engineer Seal
An Oregon engineer's embossing seal tells recipients the licensee takes full responsibility for the document, including work a supervised junior actually prepared. The specifications the seal must meet, when you may apply it, and how it functions as professional assurance.

Buying Your Ohio Seal
In Ohio a licensed engineer is expected to keep the embosser under their own control at all times, because unguarded access invites unauthorized use. Which devices state law accepts, when the seal has to be used, and what to settle before ordering.

North Dakota PE Seal: 1-3/4 Inch Design and Signing
North Dakota bans rubber stamp and facsimile signatures on sealed work, so a scanned signature graphic dropped onto a drawing does not comply. The 1-3/4 inch outer and 1-1/4 inch inner dimensions, and what a qualifying electronic signature has to do instead.






