Acorn Sales Blog

Nevada Surveyor Stamp: 1.7 Inch and an Expiry Date
Nevada requires the license expiration date to appear on the document itself, which almost no other state asks for on a survey map. Engrave it on the 1.7 inch stamp and reorder every renewal, or leave it off and write it out each time.

Idaho Surveyor Seal: Board Design, Corner Records
Idaho publishes no surveyor seal dimensions and leaves the design to the board, so the artwork has to be requested rather than assembled. The corner record, the sealing duty that belongs to surveyors alone, and the Board's own seal not to confuse with yours.

Arizona Surveyor Seal: 1-1/2 Inch Plus L.S. Markers
Arizona surveyors order two things, a seal and a run of identifying markers carrying their registration number under a required letter prefix. Where that prefix belongs, which survey points need a marker, and what the seal itself carries.

Utah PE Stamp Rules: 1-1/2 Inch Minimum, Sign Across It
Utah's 1-1/2 inches is a minimum, not a fixed size, so a 1-5/8 or 1-3/4 inch die is compliant and a 1-1/4 inch die is not. Where the signature and date have to run, and what else the rule leaves unspecified.

Use of a Louisiana Professional Engineer Seal Stamp Indicates Professionalism
Louisiana professional engineers can meet the seal requirement with a pocket seal, an electronic seal or a heavy-duty embosser. What the board's usage rules cover, when the seal goes on a document, and how to order the right device.

Understanding what Guam Engineer Seal Stamps Are and When to Use Them
Guam's Public Law 33-28 limits the engineer seal to those who passed the exams, hold a registration number and have not been disciplined. Which submissions must carry the stamp, the certification sentence written beside it, and the exception for progress submittals.

Using Your New Jersey Engineering Embosser
Every New Jersey engineering seal is 1-1/2 inches in diameter, built from two concentric circles with State of New Jersey across the top. What else goes between the circles, how to use the embosser correctly, and the regulations your device has to satisfy.

West Virginia PE Seal Rules: No Discipline, No Facsimile
West Virginia bars any engineering branch or discipline from the PE seal, so out-of-state artwork with CIVIL or STRUCTURAL on it is non-conforming. Facsimile signatures are barred by statute, no size is published, and the die carries four fixed elements.

Washington Engineer Embossing Seals
Newly licensed Washington engineers must obtain a PE stamp or embosser, or both, and either a standard or a custom design has to meet state requirements. What the design rules cover, how embossers and stamps differ, and how to order one that complies.

Creating and Using the Virginia PE Seal and Embosser
Virginia requires a professional engineer to affix an official stamp or seal to final engineering documents, and the state designs the seal itself. What the seal has to show, how the embosser and inked versions differ in use, and where an electronic seal fits.

Mississippi PE Seal Requirements: Size and Wording
A Mississippi PE seal is circular and runs 1-5/8 to 2 inches in diameter, and the legend reads Licensed Professional Engineer or Licensed Professional Surveyor. Why Mississippi licenses Professional Surveyors rather than land surveyors, and how the board's own 2 inch seal differs.

Nevada PE Stamp: 1.7 Inches and the Expiration Date
Nevada asks for something almost no other state does: your license expiration date has to appear on the document itself. Where the rule lets you put that date, the roughly 1.7 inch size, and which submissions must be sealed.






